When I hold the stalk in the wash position water only comes out for 3 or 4 sweeps of the wiper - is this normal

Note: rear not front which is fine except that activating the fronts randomly washes the headlights, it's probably not random I just haven't figured out what's what  Geoff

fronts are washed when the headlights are on and you wash/clean/flick the wiper switch.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Rear - same as mine! Water should flow briefly before they wipe, if not the non-return valve isn't working as intended

Front - will spray every 5 times if the lights are on

I wouldn't mind getting any water at all out of mine.

My dad was fitting a new starter motor today for his RR, so whilst he had his tools out thought we would have a go at fixing his rear washer. So I had a look at the guide on here but skipped a few steps, just unscrewed the motor face whilst still fitted to the car, cleaned all the brown gunk out of the tubes which were blocked solid, also picked with some long needles and voila, working rear washer..if anyones washer not working it might be worth a go before takng whole thing off,u need some v long v fine needles/wire to get right up and into the tube and into the little washer holes on the wiper..

Lolo, my rear washer doesn´t work.
Could you pls link to that guide. I can´t find it.

@ starman

Always worth checking the wiki

This one: http://www.fullfatrr.com/forum/topic9924.html

and this one: http://www.fullfatrr.com/forum/topic884.html

Should sort you out .
Experience is the only genuine knowledge, but as time passes, I have forgotten more than I can remember
Volvo V70 P2 2006 2.4 Petrol 170bhp Estate SE
MG Midget Mk1 1962

Previous: L322 Range Rover TDV8 3.6 2008; L322 Range Rover TD6 3.0 2002; P38A Range Rover V8 1999