Advertise on fullfatrr.com »

Home > Maintenance & Mods (L322) > TD6 Air Filter change
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
The Flying Scot



Member Since: 09 Apr 2009
Location: Surrey
Posts: 77

Scotland 2012 Range Rover Westminster 4.4 V8 Fuji White
TD6 Air Filter change

Hi, can anyone tell me how to remove the plastic engine cover to access the air filter housing?

I have read and followed RRUK's instructions on the sticky and have removed the allen key bolts but cannot seem to budge the cover. Am i missing a bolt or something or do you need to prise it open with some force??

Any advice would be appreciated.

Cheers 2011 Range Rover TDV8 4.4 Vogue SE
2007 Range Rover TDV8 Vogue (Sold)
2004 Range Rover Vogue TD6 (Sold)

Post #18348 17th May 2010 10:21am
View user's profile Send private message View poster's gallery Reply with quote
RRUK
Site Supporter


Member Since: 08 Jun 2007
Location: UK
Posts: 6346

United Kingdom 2019 Range Rover Vogue SE SDV8 Santorini Black

Likely you have missed one. Have you got the one down the left side and the one at the back of the engine bay? If you have un-done them all it will pop off with a tug.

Also, don't forget it won't come off with the oil filler cap in place! Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Post #18350 17th May 2010 10:28am
View user's profile Send private message View poster's gallery Reply with quote
The Flying Scot



Member Since: 09 Apr 2009
Location: Surrey
Posts: 77

Scotland 2012 Range Rover Westminster 4.4 V8 Fuji White

Thanks. I was checking to see if I missed any but couldn't find another bolt. How many are there? I took out 3. There were 2 at the front and one at the back. 2011 Range Rover TDV8 4.4 Vogue SE
2007 Range Rover TDV8 Vogue (Sold)
2004 Range Rover Vogue TD6 (Sold)

Post #18351 17th May 2010 10:42am
View user's profile Send private message View poster's gallery Reply with quote
RRUK
Site Supporter


Member Since: 08 Jun 2007
Location: UK
Posts: 6346

United Kingdom 2019 Range Rover Vogue SE SDV8 Santorini Black

Going from memory (as I don't have a TD6 any longer) you remove the oil filler cap (stuff a clean rag or tissue in it to prevent dirt getting in), remove the front plastic cowl that sits above the fan blades and to do this you need to remove the PAS reservoir cap too, then you can access the allen bolts for the air filter cover.

Don't forget to unscrew the air inlet tube from the filter housing on the left hand side too. I'm sure there is at least 4 bolts, just use a torch if you can't see them all, I think there is one down the left side out of view. I seem to recall having to use an extension bar to access one of them. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Post #18357 17th May 2010 11:32am
View user's profile Send private message View poster's gallery Reply with quote
The Flying Scot



Member Since: 09 Apr 2009
Location: Surrey
Posts: 77

Scotland 2012 Range Rover Westminster 4.4 V8 Fuji White

Thanks, that's great 2011 Range Rover TDV8 4.4 Vogue SE
2007 Range Rover TDV8 Vogue (Sold)
2004 Range Rover Vogue TD6 (Sold)

Post #18358 17th May 2010 11:38am
View user's profile Send private message View poster's gallery Reply with quote
adara



Member Since: 09 Dec 2008
Location: Eastern Europe
Posts: 736

Romania 2019 Range Rover Vogue 2.0 PHEV Santorini Black

It's a lot easier to reach the rear bolt if you completely remove the pollen filter housing, held only by two bolts.

Post #18457 19th May 2010 7:05am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site