Home > Maintenance & Mods (L322) > Tailgate button cover - am I being a muppet? |
|
|
RRV78 Member Since: 15 Sep 2016 Location: Truro Posts: 203 |
I removed the boot trim to fit mine properly I think there was about six screws.
|
||
1st Sep 2017 9:57pm |
|
mpirie Member Since: 26 Jun 2012 Location: In the Highlands Posts: 895 |
^+1 Much easier if you remove the plastic trim, fit the rubber cover and replace the trim. |
||
1st Sep 2017 10:22pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7628 |
Gave up with mine..... might remove trim tomorrow and do it right....
|
||
1st Sep 2017 10:28pm |
|
GGDR Member Since: 26 Nov 2016 Location: London Posts: 3519 |
Great tip - thanks guys!
|
||
1st Sep 2017 10:29pm |
|
supershuttle Member Since: 20 Mar 2011 Location: Lancashire Posts: 3641 |
I was also struggling - removed the boot trim and it was pretty easy after that Geoff |
||
2nd Sep 2017 6:31am |
|
andygts Member Since: 16 May 2015 Location: Yorkshire Posts: 335 |
mine sat on its packaging for ages because i thought you had to remove the trim, tried to fit it without and it went straight in Current
|
||
2nd Sep 2017 8:05am |
|
stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 34911 |
^ some do and some need the trim off to get a good seating.. ... - .- -.
|
||
2nd Sep 2017 9:38am |
|
Mr Tee Member Since: 13 Dec 2010 Location: Near Wackyjim Posts: 2598 |
Just did mine, poked the lugs in with a wee screwdriver |
||
2nd Sep 2017 11:36am |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis