here's a thought, if you change the headlight beam to europe would this now be a flat beam like the newer L405's have....
will there be any light degradation... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

I too - would love to know the answer to this as about to drive back across Europe to Transylvania! And is it as easy to do as the owners manual says? A week and counting before I pick the Westie up and head straight to the ferry! Series 2a LWB Hardtop - ex British Aerospace that was then used in an armed robbery! not by me!
2 door V8 1979 Range Rover
A slight Subaru blip..
110 County 200tdi
R reg 300 tdi Discovery Aviemore - gone to a local enthusiast to be resurrected in Transylvania
2003 TD5 Discovery2 - now sold
and the 2 wheeled Range Rover - BMW R 1150GSA

and finally the big lady of my dreams... 2012 Westminster - gives me a smile every morning

It is as easy to do as the manual says.

I have mine permanently on "continental" setting and I find no degradation of the light. All it does, as said, is flatten the beam.

Incidentally, it has been sufficient for the French Control Technique (MoT) John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

thats interesting John..  ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

It is truly easy to do
38 second job
I timed it
To do both headlights
And put the bonnet back down

Yep - I did this on my D3 a few years back, and the levers then stuck in the 'continental' position!

Plenty of light output and was never a problem for ensuing MOTs ... Regards,
Mick

'Bertha' - 2014 SDV8 Autobigraphy
'Vincent' - 2010 TdV8 Vogue SE
- 'Molly' - 2005 HSE Auto
'Dixie' - 2000 D2 Td5 ES