Hi Guys, having a major issue with air suspension on my 2003 TD6. I started getting "air sus inactive" message long time ago and when I plugged in my icarsoft LR11 I was getting a "sensor on air tank" error message along with "supply fault" error - I then replaced sensor . The chap who fitted the tank sensor had put my suspension in "production" mode and hadn't told me (or had decided he wasn't going to !!) & then I had then taken it to a LR specialist who I thought would do a "hard reset" to clear any remaining faults - but they couldn't do that either & changed suspension mode to "normal" & on driving out of specialist's yard the suspension went into extended mode and blew drivers front airbag and destroyed a sensor - they replaced bag & sensor and recommended I take it to a electrics specialist who fixed the sensor supply wire. All faults seem to be cleared but car keeps going into extended mode, I can just about climb in, must be about 4ft in the air !!!! Its still in this garage at the minute but I have a feeling they don't want to waste anymore time on it as they are very busy with smaller jobs that are less hassle.....Has anyone experienced similar or have any constructive advice on sorting problem ??? kindest regards in advance......

PS. NO LIGHTS AT ALL ON "UP & DOWN" SELECTOR ON DASH

Last edited by Blackvogue2012 on 25th Apr 2018 4:22pm. Edited 1 time in total

try this,

http://www.fullfatrr.com/forum/topic23038.html ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Thanks Stan, read that earlier, def going to give it a go !