Advertise on fullfatrr.com »

Home > In Car Electronics (L322) > Bluetooth ULF upgrade again -- sorry for another thread
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green
Bluetooth ULF upgrade again -- sorry for another thread

Hi Folks,

4.4V8 04 plate

Doing some prep work for adding ULF -- I've found the white X400 -- but it's plugged into a harness that goes to a nokia box in the front passenger footwell -- no problem to disconnect.

I don't currently have a 54pin connector, and intend to make my own loom when I get bits -- but I'm struggling with microphone at the moment -- I've found these: -








Are they what I'm looking for, and if so, how to connect, also if someone has the direct pin info for the loom I need to make I'd be very thankful.

Here's hoping Smile

Post #480608 10th Jun 2018 5:29pm
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Winchester
Posts: 5286

England 2008 Range Rover Vogue TDV8 Bournville

This thread may help, look for posts with pdf links (e.g. last post)

http://www.fullfatrr.com/forum/topic35589....p;start=15 
Have iiDTool BT in Hampshire - happy to help Smile
Also have VAG VCDS if you have an Audi/VW etc.
Always have comprehensive toolkit: hammer, duct tape, WD40 Wink
robertus-brunneis - sollus-arbilla vagor stlata

Post #480613 10th Jun 2018 6:21pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

Thanks Joe, I actually have the same connect2 box, I was hoping just to dosconnect the loom, but maybe use the front to back connections for the microphone?

Thanks for the pointer to the PDF

Post #480615 10th Jun 2018 6:31pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

Further -- thanks to Joe for the pins on the 54 pin plug, anyone know which does what in the the 12 pin X400?

Post #480617 10th Jun 2018 6:38pm
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Winchester
Posts: 5286

England 2008 Range Rover Vogue TDV8 Bournville

IIRC the 12 pin connector serves no function with regards to the ULF module 
Have iiDTool BT in Hampshire - happy to help Smile
Also have VAG VCDS if you have an Audi/VW etc.
Always have comprehensive toolkit: hammer, duct tape, WD40 Wink
robertus-brunneis - sollus-arbilla vagor stlata

Post #480624 10th Jun 2018 7:31pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

Now thats really confused me -- I thought I was creating a loom from a 'new' 54pin on the ULF to the 12 pin X400, have I got that wrong? If I have it'll be right back to the start as I have no other connectors Sad

So I guess the real question is -- where do the wires go out of the 54pin?

Thanks

Post #480634 10th Jun 2018 8:11pm
View user's profile Send private message View poster's gallery Reply with quote
Joe90



Member Since: 29 Apr 2010
Location: Winchester
Posts: 5286

England 2008 Range Rover Vogue TDV8 Bournville

My last post was easy to say given I am pre-wired for the 54 pin Twisted Evil

See here:

http://www.fullfatrr.com/forum/topic27721....ulf+54+pin

but also do some forum searches on "54 pin" and "ulf", lots of info on here 
Have iiDTool BT in Hampshire - happy to help Smile
Also have VAG VCDS if you have an Audi/VW etc.
Always have comprehensive toolkit: hammer, duct tape, WD40 Wink
robertus-brunneis - sollus-arbilla vagor stlata

Post #480637 10th Jun 2018 8:30pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

Thanks Joe -- that'll be what I'm trying to do, trouble is Jamie didn't finish telling us how he did it Wink

Post #480641 10th Jun 2018 8:55pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

OK, according to the wiring diagram, the Black/Yellow/black in the roof is indeed microphone pos/neg/sheild -- now, where is the other end of that ???

Post #480651 10th Jun 2018 11:21pm
View user's profile Send private message View poster's gallery Reply with quote
Bushy30



Member Since: 03 Jun 2018
Location: Oxfordshire
Posts: 208

United Kingdom 2011 Range Rover Vogue SE TDV8 Galway Green

news......... used a cable tone to trace to the centre console for the mic lead -- I might just use the old connect2 front to back cabling and the old nokia mic instead of all this faffing...........

Post #480732 12th Jun 2018 1:11am
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2018 Futuranet Ltd & Martin Lewis


Switch to Mobile site