Had new discs and pads fitted all round and done approx 100 miles or so. While driving around today with the windows down I’ve noticed a grinding/graunching noise up front, like something rubbing. Noticed it more when turning left and applying brakes. Had a look when I got home and all discs have an even band across the entire disc apart from the drivers side front which still has a good inch or so of non contact. Pictures below. All discs are Pagid with Textar pads, all new. Will be going back to the garage that fitted then but in the meantime, any ideas what the problem may be?

Hot sure about the band, but it could just be a stone in the back plate. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
Fiat 500x 1.4 multiair Lounge 2015
2010 LR D4 Commercial 2.7 TDV6

Just given them a good wash down. I will have to go for a run and see if it’s any better. 2011 RR Autobiography 4.4 TDV8

Whoever fitted the discs may have bent the backplate, causing a light scraping sound.

Easy to check if you jack the car up and rotate each wheel.

Mike

All sorted now....a pin(???) had been put in the wrong way. now more shaking, squeals or grinding noises and after a motorway blast the disc that had a 2" ring where the pad wasn't touching has now disappeared. 2011 RR Autobiography 4.4 TDV8