today noticed that the phone hadn't paired and when I tried it kept on failing, deleted the pairing on the phone and tried to discover the phone BT - couldn't find it.
the hidden menu on the touch screen showed that the phone system was BT.

tried to flash the ECU but after a couple of minutes it came back with error E 4.

Not sure if anything in the CCF has got messed up but for the Audio system my current settings are :

ACM-Audio System

Auxiliary heater.
Fitted
Park heater
Fitted
Auxiliary input
Installed
Parking camera
Undefined 1
Venture Cam
Fitted
Navigation Region
Europe
Navigation system
Navigation is fitted
(In1) Audio visual input
Not fitted
(In2) Audio visual video input
Not fitted
(Out1) Audio visual output
Not fitted
(Out2) Audio visual video output
Not fitted
Audio unit (radio) band/frequency setting
Europe
Bluetooth
Bluetooth enabled
Cellular telephone
Cellular telephone docking station, with bluetooth
Companion 2
Companion frequency 433
Companion docking station.
Fitted
Global positioning system receiver
Fitted with global positioning system (stand alone multi-media module)
Headphone 1 is fitted.
Not fitted
Headphone 2 is fitted.
Not fitted
Headphone 3 is fitted.
Not fitted
Headphone 4 is fitted.
Not fitted
Headphone sockets
No rear headset socket fitted
Japan - MultiMedia Module
Multi-media module for non-Japanese market is fitted
Nav Mode
Land Rover mode
Nav on Move
Enabled
RSE DVD Audio Capable
Not DVD audio compatible
RSE Interface Module
Interface module not fitted
Rear Left Screen
Not fitted
Rear Right Screen
Not fitted
Rear Seat Entertainment DVD
DVD player is not fitted
Rear Screens
No Rear Screens
SMS Read List
Disabled while driving
Satellite Receiver Type
Undefined
Satellite digital audio 1
Not fitted
Satellite digital audio 2
Not fitted
Subwoofer
Stand alone subwoofer is fitted
TV Receiver Type
Receiver variant 1 fitted
Television
Analogue/digital hybrid
Traffic Message
With traffic message channel
Type - MultiMedia Module
High multi-media module fitted
Variant - MultiMedia Module
Rest of world
Vehicle information and communications system
Vehicle information and communication system not fitted
Voice control
Fitted with voice control (hosted via the multi-media module)

With the help of Patrick@GAP, via email, the issue with my phone's bluetooth has been resolved.

Cause - water ingress inside the ECU. the contact was good but the board had been sitting in some water and started to corrode

Is it possible to turn on lights (similar to FMH) when unlocking the vehicle? This is on a 2008 RR. Not sure if it was ever an option to begin with, however would be handy with dark nights closing in!

the interior lights obviously come on and the can be upgraded to brighter leds and the puddle lights come on...i cant see anything for headlights etc to come on on unlock ..
there is an option for 'follow me home' lights but thats on lock.... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Thanks Stan, already upgraded the interior ones to LED, might do the puddle lights also. Was hoping there would be something to turn the sidelights or something on if they are left on auto and its dark outside, similar to other vehicles. Thanks anyway!

Hi, tried to find out aboute Auto fldable mirrors in this laaarge thread

Can I use my new updated IIDtool BT to activate my mirrors to fold automaticly when locing my car?

Please, any advice

merry Christmas evryone!

I don't think this was ever an option Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

auto folding mirrors only became available on the facelift 2010 FF's.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Hello again,

I did not know, but when I waited for my wife shopping Christmas food, I played a little with my IIDtool and my Iphone on the parking outside. I tested a couple of the io`s and then just for fun pressed the switch folding in the left mirror - and swip... one second - it folded perfectly in along the door!
So, I think, if the motor is in there I want to use it!
When I turn off the ignition it should fold in automatic.

Don`t you all agree ??

So my question is - do IIDtool support programming the right cpu for that? An yes, my car is an old 2003

You can use the button to fold them in any time you like but as Stan appears to have confirmed, they can't be programmed to fold in when you turn the car off on older cars. It's a feature I'd like to have. Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey

There is an aftermarket solution for that but it does involve wiring and removal of door cards etc. I'll have a google for it.

proser wrote:

With the help of Patrick@GAP, via email, the issue with my phone's bluetooth has been resolved.

Cause - water ingress inside the ECU. the contact was good but the board had been sitting in some water and started to corrode

Cleaned up with contact cleaner and everything dried out.

Also the plastic water shedder had been fitted but had been pushed to the back and was not protecting the ECUs - again this has been remedied

A big thanks to the guys at GAP for helping to resolve an issue that had nothing to do with the tool/software.

link to where to get the needed materials? The GAP link didn't seem to work? I'm assuming I need the odbII adapter and an app from itunes?

Just ordered the Carly for my M5 and can't wait to start playing with it. Seeing if I can do the same sort of things with the Range...maybe I'm being overzealous and risky getting into all the computer units of these cars  2014 FF Autobiography 5.0 SC
2008 FFRR (sold)
2008 BMW M5

I can't seem to the live values for the injectors??

Maybe it's not on the my10.

Hi, is there any way to hack the system, that main instrument panel would show radio stations or nav guidance etc.?
______
Answer is to myself no. Parametrics for it is missing, totally. Both h/w and s/w. Main cluster with graphics drivers are from FoMoCo and satnav (independent module and peripherals) from Bayern Motor Werke / Japanise Alpine or similar. There is no hardwire link between these 2. Correct me, if I'm wrong.