I have been searching high and low for part numbers and rough prices for the key parts needed to convert my 2004/5 pre facelift Range Rover to the newer 2010 style front end and nobody seems to have compiled a list yet.

I thought it might be useful for other members doing the same thing or considering the conversion. Many of the parts come up on the bay for cheaper, but the prices here are the list prices at the main LR online suppliers like Britpart, Paddock or FamousFour etc. Remember to give Dan at Duckworth parts an email as he often beats these prices for forum members!

A great site to research part numbers and illustrations on is LRparts.ru (thanks to member Chris595959), you can also find a mine of information on RAVE and Microcat all in the WIKI section of this forum.

Stan and Pretlove amongst others have compiled info on here for the conversion to the 2006 facelift which shows some details/issues that are shared with the 2010 conversion. From reading on here and other forums the main issue with the conversion seems to be getting the wiring correct so that you have no error codes. I decided to create a conversion loom so that I could test things before taking the car apart. This then means I can focus on the bumper modifying with the wiring all ready to plug and play. In theory this means my main focus will be on the wing tabs, wing brackets and fog light holes.

I will be compiling a complete how to including pics and plans later.

The list below is what I have compiled so far. Feel free to comment or PM me if you have a better part number (superceded parts etc)of if I have missed anything out.

I have tried to list the parts and instructions in the order that you will need to do them or prepare them. If you see anything that needs changing or improving on here just PM me and I will amend it.

Tom


FRONT END CONVERSION PARTS starting from top to bottom:

Headlight RHD LH (non adapt) LR026154 £481 +VAT (possibly grey plastic), LR028480 £670 +VAT (possibly black with no lower reflector), LR010824 £710+VAT, (LR010821 superseded by 26154)

Headlight RHD RH (non Adapt) LR026139 £506+VAT (possibly grey plastic), LR028469 £670 + VAT (black without lower reflector), (LR010815 superseced by 26139)

NOTE: There are many versions so waiting for advice on which are which as the microcat I am using does not explain. I am looking for the 2012 black version as in the pic below. Unless your car is set up for adaptive headlamps you might as well get the non adaptive cheaper ones. If you fit adaptive it should not be a problem but they will not turn as you steer. I don't know if the new adaptive lights are compatible with the 2006-9 systems. My conversion is based on the non adaptive headlights.

HEADLIGHT WIRING

On some models you will need a connection adapter and aftermarket module or rewire to stop flickering etc. if converting from pre 2006 model. On my 2004/5 (54) model i found that the headlights and rear lights worked fine with no flickering. They did flicker for a short period on start up but this can be switched off via the hot and cold monitoring settings using an IID tool.

Headlight wiring plugs come up on ebay for around £45 used with the wires. You need to wire them in the following way.

2010 HEADLIGHT PIN CONNECTIONS (from a 2002-2006 plug)

Note you will need to connect the pin 4 and pin 16 together to the sidelight live in order for the circuit to work.

1 - ANGEL EYE/SIDELIGHT EARTH - From Earth on 2002 sidelight
2 - INDICATOR EARTH - From Earth on 2002 indicator
3 - INDICATOR LIVE - From Live 2002 indicator
4 - ANGEL EYES/SIDELIGHT LIVE - From Live on 2002 sidelight
9 - XENON EARTH - From 2002 pin 7
10 - HALOGEN LIVE - From 2002 pin 9
11 - XENON LIVE - From 2002 pin 6
12 - HALOGEN EARTH - From 2002 pin 8
16 - ANGEL EYES/SIDELIGHT LIVE - From Live on 2002 Sidelight

The 2006-2009 version already has the same headlight plugs but the wiring needs to be changed around.

HEADLIGHT CONVERSION LOOM

You can purchase the 2002 headlight (male) bulkhead connector and wire this in to the 2010 connector to create a conversion loom:

http://www.simtekuk.co.uk/product.php/rove...:::2104237

If you need a resistor then you will need to add this between the plugs. The indicator and side lights will need to be wired in using automotive waterproof connectors either 2x2 pins or a single 4 pin such as:

http://www.ebay.co.uk/itm/180913151414?ssP...1439.l2649

( you will need 2x 2 pin connectors for each side)

I have completed a loom and it all works fine on the car, plug and play ready for the conversion!

REINFORCEMENT BAR / CRASH ARMATURE MODIFICATION OPTION

Although many on here recommend changing the armature/crash bar to the newer type you can modify the old bar to fit. The key difference is the position of the fog light recesses, which can be opened up on the old bar. See the following post that shows the areas that need cutting.

http://www.fullfatrr.com/forum/topic9699.h...conversion

PDC LOOM ADAPTION

The PDC sensors on the 2010 bumper are completely different to the 2002 versions in both fitting and their connectors. You can buy the new style PDC loom to fit the new style PDC sensors and new fog light connectors but you will need to rewire the connection plug to the car I am in the process of configuring the wiring so that the plug can be replaced with a single or couple of automotive waterproof connectors. I will only know this once I remove the bumper off the car to inspect. The good news is that this can be finished off after the conversion as it is not essential to have the front sensors working when driving the car.



CONVERSION PARTS LIST

Prices are rough, it seems LR has increased many of this in May 2013

Grill (various) LR019657 £138 +VAT

Top Bracket/Upper bumper fixing LR011574 £23+VAT (sits on top of crashbar and anchors lights in place)

Crashbar LR020912 £180 + VAT (not needed if you have a 2006-2009 DPE500052)

Bumper Shell Primed w/o camera LR017329 £442 +VAT (can pick up on the bay for about £150)

Number Plate Bracket LR016853 £11.08+VAT (there are several versions for different countries, I think this is correct)

Washer Hose Set Complete LR010779 £8.73 +VAT
RH Washer Jet LR010791 £7.44+VAT
LH Washer Jet LR010792 £7.07+VAT
Washer Clip DYC000190 £1.28+VAT need 2

PDC bezels BLACK LR011193 £3.80 +VAT each need 4
PDCs sensors LR010927 £23.82+VAT each need 4
PDC Loom Aftermarket part for about £60 (Supertweaks, maybe PowerfulUK), or modded LR part. Older RRs have a different connector plug compared to the 2009 model. The loom supplies the PDCs and the fog lights.

RH Bumper Bracket LR011467 £4.08+VAT (fixes to inside of wing front and secures bumper ends in place)
LH Bumper Bracket LR011577 £3.49+VAT

Titan Silver Splitter LR024324 £38+VAT also available in black LR019001 £16+VAT (britpart)
Titan Fog Bezel LH LR024328 £28+VAT
Titan Fog Bezel RH LR024326 £28+VAT also available in black or chrome

Fog lights LR001587 £25.97 +VAT need 2
Fog Bulb LR000704 £8.62 +VAT need 2 (will need to change the connectors)

Tow Eye Cover LR018350 £16.60 +VAT

Deflector LH LR020486 £8 +VAT (the small spoilers on the bottom of the bumper)
Deflector RH LR020485 £8 +VAT

FRONT WINGS (optional if you want to change them rather than cut the existing ones)

ASB760071 LH Primed Wing £315+ VAT
ASB760061 RH Primed Wing £315 +VAT

You might also want to get new splash guards to fit with the wings and bumper, but others have cut their old ones to fit.

VARIOUS FIXINGS FOR BUMPER:

Retainers LR015238 x2 1.96 +VAT each
Retainer LR015239 x 2 £1.96+VAT each
Self Tapping Screws HS1 DYP101620 £1.11 +VAT for pack of 5 need 3
HS2 Screw DYP100780L 96p+VAT need 3 or 4
HB2 Bolt LR011851 46p+VAT need 4
HB1 Bolt LR000385 25p+VAT need 3
Bumper Self tapping screw KYP500210 £1.96+VAT need 6 ? (might be for optional bumper grill
For deflectors DYH500110 30p+VAT need 2? to attach the deflectors to the underside of the bumper
Grill Clips LR018173 £1.10+VAT each need 6

The following microcat drawing shows the parts.

Click image to enlarge

Click image to enlarge

Click image to enlarge

Very interesting, good work

Wonder why one headlight is £710 and the other is £480

VERY NICE FROM YOU

Could you please be more specific regauarding this :

HEADLIGHT TOTAL £1190 + VAT and delivery + connection adapter and module to stop flickering etc.

Thanks l=Oo\________/oO=l l:OolΞΞΞΞΞΞΞloO:l

Current
RANGE ROVER Vogue 4.4L SDV8 - 2013 - Indus Silver, on Almond.
RANGE ROVER Vogue 4.4L V8 - 2002 - ex-2003 G4 Challenge Event Vehicle, Stage 3: Australia
RANGE ROVER HSE 4.4L V8 - 2004 - one-of-one Overfinch
RANGE ROVER P38a 4.0L V8 - 1999 - ex-2000 TReK Event Vehicle: South Africa

Previous:
RANGE ROVER Vogue 4.4L TDV8 - 2012 - RANGE ROVER 3.6L TDV8 x3 - RANGE ROVER Td6 x1 - RANGE ROVER Classic 3.5L V8 x1

I agree it is odd that prices for the headlamps seem to be different. You can check the prices using the part numbers on famousfour, paddocks or britpart etc. There have been a few replacement part numbers as newer models are released and I will be checking what the differences are. Some lights have silver lower reflectors (for turning lights) at the front, others don't (see photo below). The newer ones have black plastic rather than dark grey, some are adaptive, others not. I need to get the part number for the 2012 black edition non adaptive lights with the silver lower reflectors.



The headlights and rear lights have LEDs indicators and sidelights which cause issues with the older Light Control Module so they have "disco light' effects when switched on and the indicator will often flicker at double speed.

You can buy aftermarket modules some with resistors and some without that link the old wiring to the new light and simulate the resistance so the light works properly with no bulb out warning lights.

They sometimes come up on the bay. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

Last edited by Flashman on 11th Mar 2014 5:59pm. Edited 1 time in total

Just out of interest, have you tried asking Dan how much he could do the full list / kit for?

I've not asked Dan for the full kit but I have asked for prices for some bits and I don't think he is able to match some of the online prices. I don't think that there is a single best supplier as some dealers offer some parts cheaper on some and more expensive on others. It is worth shopping around for the parts over £20. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

send me the full list of what you want inc part numbers (i'll double check they are correct), looking over those prices quickly i'll be able to do cheaper..

Headlight RHD LH (non adapt) LR026154 £480+VAT 2010 MY
Headlight RHD RH (non adapt) LR026164 £710+VAT 2010 MY

price is different as LR026164 is a LHD version You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models


Last edited by duckworthparts on 26th Jul 2012 9:02am. Edited 1 time in total

Thanks Dan, I will tweak and send over the list. Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

this is cool flashman, do you know if there's something similar for the earlier facelift?

best

andy

Hi Andy,

I am sure it is possible. If you go the lrparts.ru site and click on the microcat section you then need to find the part you want, click on the microcat code next to the illustrated part to get the LR part number, then search for that on google. It will usually then come up with the suppliers and pricing or sometimes a listing saying it has been superseded and give you the updated LR part number. That is what I did for the above parts list.

If you do it, set up an additional listing on the forum so that people can contribute and use it as reference.

Tom Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

andy , this is on the wiki and has part numbers listed,

http://www.fullfatrr.com/forum/viewtopic.p...8707db8222 ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

I bought a kit from one of the conversion companies "darn Sarf" and paid £2300 inc. VAT. This did not include rear lights, nor the newer crash bar which cost me £149 from LR. The kit did include the light adapter boxes (£150 if bought separately). Try this - http://www.ebay.co.uk/itm/Range-Rover-2010...564b715c3b - which is the full package including resistor boxes £2495+ VAT = £3000. Fitting extra, obviously but at least you know everything is there!

There are a few companies selling the whole kit, and depending on what you can find at the breakers etc it might be an easier option. The prices in my list are for new. But so far I have collected a few bits and bobs at well below these prices as used or 'removed off showroom car" so should be able to get all parts needed with a mix of used and new for just below the £2k figure all in. The other benefit is that I don't have to shell out in one go, I have been collecting for months so it hits the wallet in a more balanced way.

Examples I have obtained so far are pair of rear lights 2012 edition £330, front grill £65, Front RH light £170, 2010 alloys £300 for the set etc.

Remember many of the kits do not sort replace the washer pump and reservoir which is needed on the 2002-2005 version as the old system is not powerful enough for the jets to work properly (or so the research I have conducted seems to indicate). Tom

Current Drive
2011 4.4 TDV8 Autobiography - Santorini Black - Ivory Leather

Previous Drives
2004 Model Vogue Td6 (Touchscreen) - Java Black - Parchment Leather
1994 RR Classic 3.9 V8 Soft dash - Niagara Grey - Grey Leather
1972 Series III SWB Safari - Green (Hand Painted) - Black Plastic

cheers stan, hopefully craig can help me out with the fog light situation as i might be able to use what i already i just need to work out what else i need, might be time to go out to the garage and check!

cheers nubin flashman, i think that i need to have a look at the bumper and see whats what, i have the washer bottle and pump supplied by dan!