found this while browsing obviously in america but the same product frm mantec non the less so whos tempted

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

Verry  2008 MY Supercharged
Rimini Red / Jet
four zone climate
remote park heater
and no ugly kid windows.
magnus satis quod turpis satis

I have been very tempted to put a Mantec guard on my FFRR from day one! Had one on the D3 and I was also responsible for £30k worth of Mantec group buys on the disco3 forum! However, I hear that they are ludicrously expensive for the FFRR whereas we were only about £250-300 for the disco.  The older I get, the more I realise that people confuse wrinkles for wisdom

the ramps look very interesting too

That is Sexy as! Would it fit a pre-facelift though? 

Wow - nice set of pics Mark. Where is that from?

Dan, As far a strictly being able to hang under the vehicle - yes it would fit. But the guard mimics the plastic spoiler - and those are completely different between the original and facelift models so the bumper skin would not mate to the guard. The G4 guard for the older models looks quite a bit different:

Click image to enlarge

Click image to enlarge

Click image to enlarge

Are any of you lot really going to go off road?

I do - and I believe Mark does as well.

Damaging something very expensive from underneath is one of my biggest worries. 
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

Was only kidding - hence the

LR had one of these fitted to their FFRR on the LR off road course at the Game Fair this year. Attempts had been made to disguise it by paint though...

i go of road and push it to its limits regularly ive got a g4 mantec front guard as above but ive modified it to sit higher to improve aproach / departure angle


http://www.fullfatrr.com/forum/topic366.html

http://www.fullfatrr.com/forum/topic1147.html

http://www.fullfatrr.com/forum/topic1097.html onto no6 Range Rover

Everyone needs a hobby

Good man

Martin wrote:

Was only kidding - hence the

Ohhh - thought you were laughing at us for being so fashionably off-road.

Which we are, BTW, Mark much moreso than myself. Very fashionable


Mark, you never answered the question: who is this guard made by and where did you see these pics? (sorry, but I'm a stubborn s@)(&. )  
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

SteveMFr wrote:

Dan, As far a strictly being able to hang under the vehicle - yes it would fit. But the guard mimics the plastic spoiler - and those are completely different between the original and facelift models so the bumper skin would not mate to the guard. The G4 guard for the older models looks quite a bit different:

You'd have to compare spoiler forms - or call Mantec (or the manufacturer of the piece above)

Or just call Mark as he's got it all sorted...  
RRC 2Dr, RRC 4Dr,
P38, and 2 L322s
(wife thinks I'm nuts - prob right, too)

hi all they are all made by mantec the pre and post facelift front plates BUT if you call mantec they wont be very helpfull other than selling you a front guard like the one on the american FFRR which i believe will be about £700+ +vat


if people are really interested in these underbody protection parts i could be tempted to supply the

-front sump guard for pre facelift vehicles the same as the pre facelift g4 in the pic above
-fuel tank guards suitable for pre and post vehicles petrol or diesel
-exhaust guards for pre and post vehicles petrol or diesel (not sure about supercharged)

i will find out tomorrow what it will cost and put the prices up

all these will be made to better than mantec standards ready to fit out of 8mm alloy

i am by no means thinking of full production but if people are interested i will do them as one offs as i have all the info and machinery to do these so no need for a batch run if you want one you can have one



also available are the full range rover genuine winch kits minus the winch so you can fit your own spec / brand i can do the full kits for a very tempting price as ive got a few  onto no6 Range Rover

Everyone needs a hobby

Last edited by speedymarktd6 on 9th Feb 2010 9:12pm. Edited 1 time in total