Sorry guys quick question. What pressure would my tyres be at theyre 255/50R20. The lables been scratched off the inside of the door and I don't have the manual with me.

Cheers

Normal load 33 front, 36 rear.

Full load 36 front, 42 rear.

Well just set them at the above and they look a bit flat

What's the spare supposed to be at? Its at 36 and I'm getting warnings

if you have nexens fitted then they do look flat when at the correct pressure... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

33 front and 36 rear refers to car with 4 people and light luggage some on here put less in as in my case its mostly only 2 of us. Therefore i put 31 front and 34 in the rear and it makes for a more comfortable ride. Present :2008 TDV8 HSE
Gone Audi A5 2.7TDI
Gone Discovery 3 HSE
Gone Mercedes CLK
Gone Range Rover 2.5 DSE

Vorbis...MD told me the spare has to be 45+ to stop TPMS warning...worked for me at 46psi GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
HAVE 1999 Discovery 2 GS 4.0 V8 - Silver - Off Road Toy
GONE 2013 L405 4.4 SDV8 Vogue. Black with Silver roofline and 22" s
HAVE 2015 Jaguar XF.

Thanks guys. If I see that warning light once more, I think ill get the 12 bore out and shoot the bloody things

Get an IID tool...you wont regret it, especially when you switch that B y TPMS off  GONE 2010 Facelifted 3.6 TDV8 - Stornoway Grey + 22" Overfinch Olympus
HAVE 1999 Discovery 2 GS 4.0 V8 - Silver - Off Road Toy
GONE 2013 L405 4.4 SDV8 Vogue. Black with Silver roofline and 22" s
HAVE 2015 Jaguar XF.

Is shotgun damage covered under warranty?

Ok really fecking unhappy now. Popped to the local filling station to add more air to the spare. Thought I'd check the others again whilst I was at it. Pushed the air hose into the first tyre and the poxy bleeping valve snapped off

Currently sat here waiting for the AA to come change the wheel. No idea where the fecking jacking point is, and I'm wearing half decent clothes.

If you're in the Halstead area please feel free to come and poke fun

sorry to hear that paul, these metal valves corrode and do snap off very easily... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Nightmare... feel for you... this problem is actually referred to in the buying guide

If you get new ones (as opposed to ditching TPMS metal valves for traditional rubber valves) then new LR supplied ones are meant to be zinc coated to stop such deterioration making them brittle... and in any event, greasing them with a product like vaseline to prolong valve life from corrosion.

Hey Vorbis - Halstead as in Essex..?

I'm only up the road if you need a hand? Ash
------------------------------------------------------
2016 SDV8 AB

Well finally back home now What will a new set of sensors and valves cost me?