I'm after a Near Side (Passenger) rear light unit for a 2010 L322 please.

One with a broken lense would do fine, as I luckily have 2 spare outer lenses I can put onto a damaged light.

What exactly do you need Josh?

I did manage to ramble didn't I Craig?

I'm after a back left 2010 LED light, ideally one with a broken lense as I have x2 lenses I can fit to the unit. If there's no broken one's, then a good one would be ok!

How have you got two lenses Josh? They are not available separately!

A friend of mine manufactures plastic items, industrially. I asked him to take a look at a lamp unit. He had it taken apart and lenses moulded and made. They're a perfect fit, it even has the correct black edge for the later 2010 lights.
I'm going to try and find a 2010+ headlight with a broken lense and see if he can do something with that aswell.

Hi Josh,

I presume you are looking for the grey insert light and not the black one? If the latter then I have a brand new and unused JLR N/S rear 2012 LED light that I don't need now.

regards

John

Last edited by tb10 on 22nd Nov 2015 10:46pm. Edited 1 time in total

Josh, you have a PM sir

Josh,

Sorry to hijack but how much would he want for a front headlight lense for a 2006-2009 FF at all? FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

FYI I have a 2006-2009 rear drivers side unit if thats any use to you with broken lense? FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

@Josh

I think your friend may have a new sideline in work from this forum with skills like that. Howard
____________________________________________________
2002 4.4 V8 LPG Tartarini
Have RSW AllComms in Cheshire J17 M6 - happy to help.
*Gone: Classic Vogue SE Auto V8 3.9

Josh I'm needing a pair of clear lenses for a 2006-2009 rear lights if your mate starts selling them

I'm sure a small run would be on the cards if he wants to set up for it

I'm seeing him tonight. I spoke to him on the phone earlier, and he'd be happy to start manufacturing the parts.

He'll see me tonight and give me ideas on prices. I would need damaged lights, or complete one's for him to make moulds from. But initially he was saying rear lenses would probably cost him £15 for both.

The one's he's done for me have always been free, but he's happy to keep costs down and see what plan we can come up with

Well I'd have some... could you ask him if he could make them out of thicker plastic, the originals are silly thin, twice as thick and they would be much better plus I doubt you would notice the added thickness from the outside...  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Front ones could be a pain but I could free them up or drive down with it one day moulds to be taken... FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

I could be doing with a rear N/S MY10 lens!  Got - 2017 SDV8 Autobiography in Loire Blue
Had- 2008 TDV8 Vogue SE in Java black
Had - 2007 S/C in Stornoway Grey