Hi. On our driveway today I put the suspension on full height to look underneath. The suspension has gone up fine but now says self levelling suspension inactive. I did the same thing yesterday with no problems. Our driveway is on a slope away from the house and I usually reverse up it but drove up it this time, it obviously didn't like it.

Any tips on how to rectify the fault? Don't really want to be driving round on full height.

Cheers

James

sounds like the levelling function wont cope with your 'slope'....get it on a flat road and it should revert to all height modes.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

It's parked up on flat at the moment. Will try it again in a short while. It's been operating fine up till now.

Tried disconnecting battery for half hour than reconnected and left for half hour. Still no joy.

Just letting folks know that the self levelling suspension didn't like me putting it on full height on my sloping drive and it couldn't cope with it so shut it down.wnt to local specialist and 54 quid later it was reactivated and no problems.