Advertise on fullfatrr.com »

Home > Technical (L322) > Driver door window not working
Post Reply  Down to end
Page 1 of 1
Print this entire topic · 
vnitos



Member Since: 18 Nov 2010
Location: pretoria
Posts: 369

South Africa 2007 Range Rover Supercharged 4.2 SC V8 Zermatt Silver
Driver door window not working

Opened the window which then decided to close by itself; however half way up it stopped - now it's not moving at all, though there sounds to be a clicking noise.

Whilst it was going down I heard some noise - will appreciate some advice regarding what it could be. Does the fact that it make the clicking noise mean that there is power going to the regulator and that the regulator is fubar or should I start by checking / replacing the fuse and the relay

Post #416024 30th Nov 2016 4:40pm
View user's profile Send private message View poster's gallery Reply with quote
stan
Site Moderator


Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34947

United Kingdom 

sounds like a 'door card off' to see whats happening.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

Post #416027 30th Nov 2016 4:42pm
View user's profile Send private message View poster's gallery Reply with quote
Dolphinboy



Member Since: 08 Dec 2009
Location: Bristol
Posts: 3066

United Kingdom 2011 Range Rover Vogue TDV8 Atacama Sand

reckon your wire on the Regulator has come off the runner or split. There is also a flimsy piece of plastic that holds the wire end into the regulator and these are known to split and dislodge the wire.

Door card off, have a good look and then get a second hand regulator if required (c. £30-40 in UK)

Easy enough to replace yourself and there are lots of videos to show you how. Thumbs Up

Post #416031 30th Nov 2016 5:51pm
View user's profile Send private message View poster's gallery Reply with quote
vnitos



Member Since: 18 Nov 2010
Location: pretoria
Posts: 369

South Africa 2007 Range Rover Supercharged 4.2 SC V8 Zermatt Silver

took the door card off and found that one of the cables have broken.

now what to do - does it require a new regulator or can one buy the cables loose

then if one can get the cables loose how do you fit it

Post #416196 1st Dec 2016 6:25pm
View user's profile Send private message View poster's gallery Reply with quote
Dolphinboy



Member Since: 08 Dec 2009
Location: Bristol
Posts: 3066

United Kingdom 2011 Range Rover Vogue TDV8 Atacama Sand

Don't faff around trying to get a new wire on (even if u can find a new wire for sale on its own they are a b&gger to fit!) just get a second hand regulator from a breaker or eBay for c.£35. Takes about 1-2hours to fit - plenty of YouTube videos to show u how. Thumbs Up

Post #416244 1st Dec 2016 11:40pm
View user's profile Send private message View poster's gallery Reply with quote
vnitos



Member Since: 18 Nov 2010
Location: pretoria
Posts: 369

South Africa 2007 Range Rover Supercharged 4.2 SC V8 Zermatt Silver

thanks will do that

just to confirm - i assume that the regulator comes with all the cables

Post #416257 2nd Dec 2016 4:58am
View user's profile Send private message View poster's gallery Reply with quote
Dolphinboy



Member Since: 08 Dec 2009
Location: Bristol
Posts: 3066

United Kingdom 2011 Range Rover Vogue TDV8 Atacama Sand

Yes, make sure you get the correct one for the relevant window. They are all different. Whistle

Post #416306 2nd Dec 2016 3:31pm
View user's profile Send private message View poster's gallery Post Reply
Post Reply  Back to top
Page 1 of 1
All times are GMT + 1 Hour

Jump to  
Previous Topic | Next Topic >
Posting Rules
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum



Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis
fullfatrr.com RSS Feed - All Forums


Switch to Mobile site