now i've confirmed to you all that i'm mad

anyway, the large rear 'box' on my 4.4 v8 is clearly visible and areas of the black 'coating' have come away leaving shiny steel patches - quite simply looks unsightly

so i want to repaint the box - have looked at exhaust paints mostly used for bikes and they are ok to about 600 degrees

so - anybody done it and any recommendations?

thanks in anticipation

done the exhaust and anything else i could under the back of the range ..used wickes 'direct to metal' paint ......... ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

I dont think the rear box gets all that hot. So you should be OK with most paints I guess. 

thanks guys - not as mad as i thought -

I have painted loads with any heat resistant mat or satin black paint. Even Barbeque Spray paint is effective as its totally heat resistant.

I think Satin Black heat resistant looks best. Lots of bits you can spray under there and it looks great after just a few minutes work but be careful not tape off anything you want to avoid

I can't stand sight of mine, so thinking about dumping and replacing with custom twin pipes like the supercharger exhaust. Nothing larey, just oem style. Seen Midlands exhaust do set up on ebay for 260 so going to look local for similar set up.

http://cgi.ebay.co.uk/Range-Rover-Land-Rov...41557211ef

This will lose the box completly and just have to shiney new pipes

Nickj wrote:

I can't stand sight of mine, so thinking about dumping and replacing with custom twin pipes like the supercharger exhaust. Nothing larey, just oem style. Seen Midlands exhaust do set up on ebay for 260 so going to look local for similar set up.

http://cgi.ebay.co.uk/Range-Rover-Land-Rov...41557211ef

This will lose the box completly and just have to shiney new pipes

Not my cup of tea - I think the fact you cant see the pips on the RR is classy. 

Satin black high temp paint has worked a treat on mine, just give it a quick once over every few months to keep it looking tidy  2006 Mercedes CLS
1991 Retro-style Mini
But really finding it hard to fight the urge for a S/C...

But on the supercharger you can just see tips which is classy and cool. I just want a S/C exhaust on my 4.4 really. Do they fit??

Apolagies about asking q's on your thread but think you've got your answer. Paint it now and we are all as mad as each other!!

Did mine with matt black exhaust paint from my local autofactors.

Made a big difference to the rear as mine was also peeling/patchy. TDV8 HST Sport **Current**

4.4 V8 Autobiography and 22" wheels **Gone**

i think all exhaust show the 'silvery metal' bit after a while and it is so easy to put the RR into high mode and walk underneath and paint.. ... - .- -.




click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

i used satern black paint, the box does not get hot at all, just give a going over with wire wool and your ready to go...looks the part when done, when i am ever behind a rr i always look at there back box...

Click image to enlarge

Admin note: this post has had its images recovered from a money grabbing photo hosting site and reinstated

That looks superb! Did you remove the box to paint or leave in situ. What pipes have you added and where from at what cost if you don't mind me asking!!

Think i may have just found my next task.

Any more pics from the side maybe?

http://www.fullfatrr.com/forum/topic2333.h...arge+trims V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster