hi all,i know there was a post a few weeks back about the retro fitting of the paddle shift on a late 2010+ car but can some one say if it would work for sure on the pre touch screen cars[BMW] has it been done before.
can we get a list of parts that would be needed, i know some members here use other sites so there may be some info on other sites.
i have been looking for a site i came across once that had a box of tricks that would receive a can bus message and then put out a ibus message, it could be programmed to put out any ibus code after receiving any canbus code.
i am sure this would work with the 2010 steering controls on the pre touch screen. so if any one has come across this site please put a link up, V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

I always say, if it can be done on an X5 it can be done on a RR:

http://mrpaddleshift.com/index_after.htm 

has the x5 got it..on the same year as ours V8 facelift Range Rover Autobiography 22" wheels.
1976 Harley Davidson Iron Head Sportster

That link is for fitting it to the X5