Hello
The driver’s seat base on my 2009 is looking extremely worn and has been titivated already. Question is, can a passenger seat base be swooped in for the driver’s one, ie. Are the bases a mirror of each other and this interchangeable?
Many thanks

Yes, I’m sure there is a thread about it somewhere.

You might need the foam/leather off the metal frame though. They might be different.

Someone with more seat knowledge will be along soon, but it’s definitely been done.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

You can change them over.
https://www.fullfatrr.com/forum/topic62760.html?highlight=squab John
2008 Stornoway Grey 3.6 Tdv8 Vogue
2005 TD6 Java Black Vogue - Written off!!
GAP iiD BT
2003 Discovery TD5 Auto, Nanocom Evolution - gone to a new home!
MasseyFerguson 152 - No electronics!! - Sold

Brilliant news! Thank you folks and will let you know how I get along.

Thanks for that. I need to do the same.

I just bought a new seat valance to replace my broken one but I’m concerned that the foam on the seat edge may have collapsed and the pressure of my bum when getting in and out will break the new valance. Ron B. VK2OTC
2004 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

Mine done. Half day of work, need to remove seats from the car. Its littlebit hard to get leather back on place, but not impossible. Leather + foam replaced (LHD).