Hi, Brilliant site by the way! Having just upgraded to a TDV8 from a much loved and fantastically well behaved 4.6 P38 I am a little apprehensive as to whether I have done the right thing in swapping a very reliable old friend just for something newer!! Time will tell. However I am glad to have found this site in case anything odd should occur.

Basically I am wondering if some kind soul can shed some light on the fitting of the brackets that hold the cartridge in place behind the back seats that allows you to pull the retractable net up to the roof. I did find an excellent article on here with a list of the parts that the poster got from Beadles so that is much appriciated. I have managed to assemble the brackets but cannot see how the brackets that hold the cartridge in place at either end fit down onto the small shelves by the rear windows. I also cannot seem to re find the article I read.

If anyone can either point me to where I might find how to fit these brackets or give me personal advice it would be gratefully appreciated. If it helps, in case I am using the wrong lingo the part number I am talking about is ERA000023SUN which is more technically the plastic cowling that holds the metal bracket inside it. It is how this plastic cowling fits to the car I am unclear on. Hope this is not too rambling. Kind regards, Ben.

Have a look here:

http://topix.landrover.jlrext.com/topix/co...;cat=OWNER


I think you need number 18

Bloomin eck ! Thank you nbunney Bob on that is! Perfec! Now I shall just go and butcher the rear of my new truck!