![]() | Home > For Sale & Wanted > FS another set of 2010 side vents. |
|
|
|
| IanV8 Member Since: 14 Jan 2010 Location: Dunfermline Posts: 171
|
Grey coloured with three fins at top taken off my 2010.
|
||
|
| googsy2 Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 815
|
|
||
|
| JOKER Member Since: 11 Sep 2008 Location: Here Posts: 7749
|
Yeah and at a very good price for 2010 / 11 three fin vents , you would be lucky to find them anywhere cheaper |
||
|
| alanm_3 Member Since: 19 Feb 2011 Location: Glasgow Posts: 1306
|
Ian, I've PM'd you about these! |
||
|
| hongkongphooey Member Since: 27 Aug 2010 Location: Blackpool Posts: 77
|
I'll take those off you |
||
|
| IanV8 Member Since: 14 Jan 2010 Location: Dunfermline Posts: 171
|
Now sold to alanm3, sorry to the other 3 who sent me a pm but alan was first.
|
||
|
| googsy2 Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 815
|
|
||
|
| Emperor Mong Member Since: 07 Jul 2010 Location: London Posts: 387
|
How difficult are they to change?
|
||
|
| stan Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 8158
|
excellent 'how to' by RRUK here mr mong http://www.fullfatrr.com/forum/topic1069.html ..............................
|
||
|
| JOKER Member Since: 11 Sep 2008 Location: Here Posts: 7749
|
Only takes about 15 minutes to do both sides all you need is a 10mm spanner |
||
|
| googsy2 Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 815
|
I would suggest cover side of door with a bit of tape as there isnt much room and door needs to be opened at an angle. I managed to chip my paint on door.
|
||
|
| AMD Member Since: 16 Jul 2010 Location: Fareham Posts: 381
|
googsy...you are heavy handed |
||
|
| googsy2 Member Since: 02 Jun 2011 Location: Where men are men and sheep are nervous. Posts: 815
|
|
||||
|
| AMD Member Since: 16 Jul 2010 Location: Fareham Posts: 381
|
Yes, will do. The new flaps do not require holes to be drilled into the bodywork or reuse the existing holes when the old flaps come off |
||
|
|
|
| All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|





