Had a search but can see no photos of FFRR's that have the RRS rubber fitted. If anyone has done this, could you please post a picture? I'm thinking it might be a good idea to fit as a bit of protection.. (please, no condom jokes). Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

http://www.fullfatrr.com/forum/topic9387-15.html

 FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

I have completely misunderstood this... I thought this was something that covered the lip externally. I already have the internal stuff fitted. When people were talking about rust on the edges I honestly thought they were talking about some sort of rubber guard that would cover over the outside of the lip... Oh well.  Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI

I take it you mean like the arch extensions on the Discovery 2 ?



The protector doesn't look like the great big things on the Disco.......

The rear arch protectors I fitted, as detailed in the thread, do protect externally - the painted lip edge where all the stones get thrown up etc.........

Click image to enlarge

Yes mark, that's what I was meaning.. I was hoping for something a bit more subtle than the ones on the disco, but that's the idea.
Cheers.. Previously..
Vogue SE TD6
Defender 90 2.4
Defender 110 TD5
Vogue 3.5 EFI


Last edited by Contraband on 14th May 2012 5:05pm. Edited 1 time in total

Looks like some of the after market stuff is not so subtle ;



Perhaps, again, there is another model the part can be sourced from, and cut to fit etc ?

There is this generic stuff on amazon ;

http://www.amazon.co.uk/E-TECH-BLACK-GUARD...B005G46FAE

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport