|  | Home > Maintenance & Mods (L322) > Steering Wheel Badge | 
|     | 
 | 
| 
 | 
| jfb1977 Member Since: 29 Apr 2012 Location: Bury St Edmunds Posts: 563      | http://www.ebay.co.uk/itm/RANGE-ROVER-SPOR...3a71bfe55f Past (too many to list, but a few favs)...
 | ||
|  1st Jun 2012 8:55am | 
 | 
| T111RDY Member Since: 21 May 2012 Location: Dunbar Posts: 187      | You are a star!!!
 | ||
|  1st Jun 2012 11:09am | 
 | 
| Martin Site Admin Member Since: 24 Mar 2007 Location: Hook Norton Posts: 1673    | Over £12 for a badge  | ||
|  1st Jun 2012 12:10pm | 
 | 
| T111RDY Member Since: 21 May 2012 Location: Dunbar Posts: 187      | Oh well!!!
 | ||
|  1st Jun 2012 1:54pm | 
 | 
| axle Member Since: 28 Oct 2007 Location: Perth Perth the end of the Earth Posts: 2964      | It's black you see not green ,,, black thats better , right , yeh right , black.  | ||
|  1st Jun 2012 5:12pm | 
 | 
| jfb1977 Member Since: 29 Apr 2012 Location: Bury St Edmunds Posts: 563      | 
 Why do you say that? Surely there's an OEM LR part for the steering wheel badge given that my S/C came with a black one from the factory?  Past (too many to list, but a few favs)... 2007 Porsche 997 C2S Coupe 2007 FFRR 4.2 S/C 2012 Jag XKR 5.0 S/C 2014 Merc SL500 AMG 4.7 V8 BiTurbo (remapped to 560BHP) 2011 FFRR 4.4 TDV8 Vogue SE - Overfinch Conversion 2012 Porsche Cayenne Turbo 2018 AMG C63S Estate 2015 Mercedes GLE63S 2017 Maserati Levante Diesel 2017 Audi A6 Avant 3.0 Black Edition | ||
|  1st Jun 2012 5:14pm | 
 | 
| simon1233 Member Since: 13 Jun 2011 Location: Leyland, sometimes Darmstadt Posts: 650    | I had bought one of these from the bay of fleas and put it onto my steering wheel.  I replaced the interior door card black plastic badges with an enamelled version like the steering wheel badge and came to the realisation that what had cost me £10 for the steering wheel was essentially the same piece of tin I bought from Dan (Duckworths) for about £4 IIRC, but that I must have paid more for someone else to cut the tabs off the back   | ||
|  1st Jun 2012 7:41pm | 
 | 
| Martin Site Admin Member Since: 24 Mar 2007 Location: Hook Norton Posts: 1673    | 
 You can't buy the airbag badges as a separate part. The only way to do this to get the absolutely 100% original badge is to change the entire airbag assembly for a S/C airbag. Glueing on a door trim or wheel centre badge works just fine   | ||
|  1st Jun 2012 10:24pm | 
 | 
| DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027      | I have no idea why people want/need to change the original badges - black signifies an edition and model. If yours came with green - then leave it green. Sadly my TDV8 came with an SC grill, that's being remedied because I am not a pretender. 
 | ||
|  1st Jun 2012 11:15pm | 
 | 
| northernmonkeyjones Member Since: 24 Mar 2012 Location: derby Posts: 8790      | ^^^^ saw one of those quad exhausts on a ff on the m25 yesterday, was hammering round in the outside lane at a ton+.
 | ||
|  2nd Jun 2012 9:12am | 
 | 
| T111RDY Member Since: 21 May 2012 Location: Dunbar Posts: 187      | It's black, and I fancied a black badge to match!   | ||
|  3rd Jun 2012 9:24pm | 
 | 
|     | 
 | 
| All times are GMT | < Previous Topic | Next Topic > | 
| Posting Rules 
 | 
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
 
 




 
 
 

 
 

 
 

