Have just been scrabbling round under the car looking at the flue for the FBH. How sad am I

Anyway, whilst i was under there i had a look at the bushes on the front suspension.

on the lower wishbone, the rear bush has 4 lobes which seem to move around against a centre spindle. At rest there is a gap between the outer of these lobes and the spindle, same on both sides. Is this normal?

I have it going in for a service, software update and hopefully a bit of warranty work on the FBH (though it seemed to work today) on wed so will get them to swap these bushes out if they are kaput. could someone have a look on their car to see if they have the gap pls.

cheers in advance guys.  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial