I've read various posts on here and have found pretlov right up and flashmans very useful

However I can't find a clear answer to the head light washers, do u need to upgrade the pump or change out the bottle??

Also I have seen mixed views about cutting the wing lips off again some talk about it and other don't

Any help would b great
Thanks
Neil

I changed the bottle and all three pumps
To do a professional job, you need to link out
A headlight washer plug pm if you need more info.

Only needed on 02-05 remember


Cutting the lips of the wings is a must and
You need to cut out some of the inner bumper
Bracket mounts. RANGE ROVER 04 TD6
RANGE ROVER ULTIMATE EDITION 2012
UPGRADE.
MK 4 SATNAV
http://www.flickr.com/photos/jrautoelectrics/

Do I need a new crash bar?? Or just the top bar??

You need new crash bar, plastic rail just above crash bar lights and bumper clip into it
Also two steel brackets around headlights or adapt old ones
For headlight bolting point. Two bumper brackets and a complete bumper

Wheel arch liners if you like to do a job properly


That's it for body parts. Just leaves electrical RANGE ROVER 04 TD6
RANGE ROVER ULTIMATE EDITION 2012
UPGRADE.
MK 4 SATNAV
http://www.flickr.com/photos/jrautoelectrics/