Dan, could i have a price for 4 of the nuts that secure the engine top cover down on a TD6 please (5mm hex jobbies and same for all TD6 ages)
And also the bonnet catch Slam Slide that allows the bonnet release catch to slide back into place under the slam panel? Its a plastic jobby that looks to just slide in?

Also another f'in bonnet cable, rear section to the cabin again

Thanks,
Will FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

Hi Will

Cable £14.50+VAT
catch guide £9.42+vat
4 x nuts - sure there not M6's?

Dan You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models

Certain, they require a 5mm allen key, sodding things that they are! would be nice to be small butterly clip ins but nope, keeps it all watertight i guess! FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

number HS1, yes?

Click image to enlarge

Yip hs1 is the bad boy alright  FFRR MY06 facelift With TDV8 Alloys Zeros/ATR's
Mantec Sump Guard, Rigid Load liner, MY10 BT upgrade.

yeah thought so just wondered why they are listed as M6 size on there
£2+vat each

P&P £1.95+VAT You can paypal direct using - www.paypal.me/duckworthparts
Please supply your full name address when sending a paypal payment.
https://www.facebook.com/duckworthparts
www.duckworthparts.co.uk
My Direct Line: 01673 849873
Email: robin.hall@duckworth.co.uk
Supplier of Genuine Land Rover & Jaguar Parts For All Models