fullfatrr.com - View topic - Tidied up the rear end & now the front too

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > My Range Rover > Tidied up the rear end & now the front too

Page 1 of 1

Print this entire topic ·

RRUK
Site Supporter

Member Since: 08 Jun 2007
Location: UK
Posts: 6355

2019 Range Rover Vogue SE SDV8 Santorini Black

Tidied up the rear end & now the front too

Inspired by another member's post on this I took to mine this afternoon.

I used Wood-burner stove paint on the exhaust and Hammerite stone chip on the tow arm and ball hanger. Makes the rear end look much tidier. What a quick and easy fix. I even did the rear suspension arms.

Apart from the car needing a wash it looks lovely!

Click image to enlarge

Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

Last edited by RRUK on 26th Apr 2013 7:50am. Edited 1 time in total

23rd Apr 2013 5:57pm

Gazellio @ Prestige Cars

Member Since: 22 Jan 2010
Location: Chilterns, UK
Posts: 11309

I do it to all mine including the suspension arms. A very quick but extremely effective remedy.

23rd Apr 2013 6:22pm

MML

Member Since: 01 Mar 2013
Location: Europe
Posts: 47

RRUK, did you prepared the surface first? MML

24th Apr 2013 11:22am

MML

Member Since: 01 Mar 2013
Location: Europe
Posts: 47

It looks great!!! MML

24th Apr 2013 11:23am

RRUK
Site Supporter

Member Since: 08 Jun 2007
Location: UK
Posts: 6355

I just used a wire brush to get rid of flaky bits on the exhaust and the surface rust on the tow ball hanger. Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

24th Apr 2013 6:45pm

CG-SC

Member Since: 06 May 2011
Location: Falkirk
Posts: 528

2006 Range Rover Autobiography Supercharged Zambezi Silver

Looks great !

What prep did you do on the suspension arms ? Mine look pretty rusty, did you just spray the hammerite on them or did you give them a good rub down first ? Stolen / Gone: 2006MY Supercharged LPG Autobiography - Zambezi Silver with Sand/Jet/Jet Oxford Leather.....

24th Apr 2013 9:39pm

RRUK
Site Supporter

Member Since: 08 Jun 2007
Location: UK
Posts: 6355

Lazy, just sprayed it on! Discovery 4 HSE
1998 110 TUM HS FFR Hard Top XD WOLF
1982 Series 3 Hard Top

*Gone:L462 D5 HSE LUX, L663 Defender 110 HSE, Discovery 3 HSE, 2014MY Range Rover Sport 5.0 Supercharged AB Dynamic; L405 Exec Vogue SE 4.4, 5.0 Supercharged Autobiography, Defender TDCi XS CSW, Defender TD5 HT, Vogue SE TDV8, Vogue TD6, RRSport SC 4.2V8, Classic 3.9 Vogue Auto, Land Rover Series 3 SWB

24th Apr 2013 9:57pm

supershuttle

Member Since: 20 Mar 2011
Location: Lancashire
Posts: 3655

2013 Range Rover Autobiography SDV8 Luxor

A good rub down Geoff

25th Apr 2013 9:43am

RRUK
Site Supporter

Member Since: 08 Jun 2007
Location: UK
Posts: 6355

Also did the front towing eye, as it pokes out from under its cover looking rubbish.

Attention to detail

26th Apr 2013 7:50am

supershuttle

Member Since: 20 Mar 2011
Location: Lancashire
Posts: 3655

I've had a look at mine and now I'm inspired to do the same. BTW In the second picture you can see some little plastic covers that fit over the screws next to the splitter, they were originally missing on mine so I bought some more (pence from the dealer) BUT the lugs they had on wouldn't fit anywhere - so Stanley Knife to cut the lugs off (soft plastic) and a bit of Silicon to stick them in place and they've been there for two years.

Car needs a wash and the pictures show I need to bend down more when I do it

Click image to enlarge

Geoff

26th Apr 2013 8:37am

Page 1 of 1

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum