Hi all got a new bootlid that needs painting!

Can you remove the rubber strip between the painted area and the glass? Current stable:
2006 BMW M6
2007 4.2 V8 S/C FF
Gone:
2002 4.4 V8 FF

Yes, I believe it slides out sideways. Might be hard getting going due to age.

When I got mine done on my TD6, I paid someone to remove the glass too, as the replacement tailgate was a completely different colour.

 2011 Range Rover Vogue SE 4.4 TDV8

Previous cars :
2003 Range Rover Vogue TD6
1999 Discovery Td5 ES
1995 BMW M5 3.8 6 speed
1992 Range Rover 3.9 Efi Vogue
1992 BMW M5 3.8
1988 BMW 735i SE
1989 Ford Sierra XR4x4 2.9i
1981 Ford Fiesta Supersport

I see - thanks I will soak it in brunox and see how we get on Current stable:
2006 BMW M6
2007 4.2 V8 S/C FF
Gone:
2002 4.4 V8 FF

Mine was falling apart so I took a block of wood, sat it against the end of the strip and tapped the wood with a hammer to drive the strip out. It's too tight to just push out.





Once I had enough pushed out, I was able to grip it in my hand and pull it the rest of the way. I didn't replace it as later models don't have it.

It did leave a line on the painted surface where the edge of the rubber had dug into the paint over the years. Ron B. VK2OTC
2004 L322 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA

Last edited by p38arover on 15th Mar 2021 1:23pm. Edited 1 time in total

As mentioned above, it is unlikely to slide out. Dirt and deteriorating rubber tend to seize it soild into place.
Work the side edge loose with a thin block of wood or, extremely carefully NOT to touch the glass, with a screwdriver and a mallet. Once enough length has been removed to give you grip for a pair of pliers just pull the thing away along the glass bottom by pliers first, hand then.
You won't need to fit another one. LR did away with the rubber strip on later models.

I removed it from my last L322. I used a brass drift and a hammer and started tapping it from the OS to the NS and once it was part of the way out I was able to do it by hand.

Again, I didn't replace it as the newer cars don't have it and I thought the lines looked much cleaner without it. I'm probably going to remove it from this SC we've got now too.

It did need quite a "tap" to get it to start moving IIRC.

David. 2002 4.6 Vogue SE - Alveston Red with Lightstone Leather
2007 Range Rover Supercharged in Java Black with Ivory Leather
2012 Range Rover 5.0 SC Autobiography in Indus Silver with Jet/Ivory Interior
2012 Range Rover 4.4 TDV8 Autobiography in Baltic Blue with Sand Interior