|
Its a fairly easy job, the main thing to remember/do is to remove the upper trim first, the one where the seat belt comes out. It just pulls off.
Then the lower padded trim is held on by two small screws, remove and the just pull the trim up from its bottom locating lung.
The seat belt is held in by 3 Torx screws/bolts, be careful with the one holding the the actual seat belt mech. My bolt dropped into the inner panel and had to be retrieved using a magnet.
Whilst i was waiting the delivery of the new belts i filled this void with duck tape to prevent it falling so far.
Took me about 2 hrs to remove both belts as i was trying not to break anything but replacement only took 45 mins for both sides.
When replacing the upper panel you will need to locate 2 pins into the frame, its obvious when you see it
Hope this helps. Three things in a blokes life his dog,his car and a Cornish pasty,nothing else matters.
2010 Range Rover Vogue SE Santorini Black, Arabica Aniline seats
Previous cars
1973 Mini 1000
1971 Hillman Avenger
1975 Chrysler Sunbeam
1981 Ford Cortina
1985 Volvo 340
1989 VW Golf
1989 Volvo 240
1991 Volvo 240
1991 Jaguar Soveriegn
1996 BMW 730
2003 Honda CRV
1999 Jaguar Soveriegn
2003 Range Rover HSE Epson Green with Sand trim.
|
3rd Jul 2014 10:27pm
