Hi all,
I was travelling on the motorway recently and noticed a lot of wind noise coming from the drivers side door, I decided to investigate. The door striker needed a bit of adjustment to make the door close more flush to the body.
I then noticed the top of the door around the window doesn't seem flush with the top of the car, this could cause the wind noise. as I was jet washing a bit of water came thorough as well.
Here are some photos, first photo is the drivers side, second is the passenger side which looks fine.
Is there a way this can be made flush with the body?
Many thanks
James
Edited to add - the photos were certainly the right way round when I uploaded them..
|