Hi all

Working through my new purchase/project issues and I have a camera out on my 360 cameras any advice on testing it or do they fail often ? All other cameras and blind spot monitoring all work thanks

Pic didn’t attach

Had the surround cameras on the last three fattys and TBH they are just about useless in day to day driving, you play with them to start, show your mates how they work and then never look at them again, so you can save some money and just leave it....

Following this post will be loads of people saying they use them all the time but it's too much of a faf for me...  Pete

__________________________________________________
2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior
2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Parchment over Navy Interior. Sold
2012 L322 Autobiography 5.0 Supercharged Ipanema Sand, Jet Interior. Sold
2002 L322 Vogue 4.4 V8 Epson Green, Ivory over Aspen Interior (Fatty Offroader) Sold
-Click for Project Fatty off roader-

Because of the size & type of connector, they're a pain to test without the breakout box, and even then, you can only really check the correct voltages are getting to the plug that goes into the camera - it was much quicker to keep a damaged one (which happens quite often) and plug that in, if it worked, then it needed a new camera, which was the case 98% of the time.

As above, it's a novelty item for most, unless you bought the vehicle specifically because it's a feature you need, don't waste your money on it.

You could try reseating the connectors in the control module which is under the front passenger seat.

+1 for GraemeS' tip - connectors can work loose

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway