![]() | Home > Technical (L322) > Lower thermostat modification V8 4.4 M62 2002-2005 |
![]() ![]() |
|
|
holidaychicken Member Since: 06 Nov 2013 Location: Kent Posts: 1086 ![]() ![]() ![]() |
That's my understanding, the vemo should fit straight in and give you a running temp of around 93-95 degrees.
|
||
![]() |
|
holidaychicken Member Since: 06 Nov 2013 Location: Kent Posts: 1086 ![]() ![]() ![]() |
Normal running conditions are with the heater off, only under heavy load will the heater cause the stat to open.
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8816 ![]() ![]() ![]() |
It's not a hot running issue, they were designed to run at a very high temp, it is a normal feature but not a desirable one, hence this mod.... ![]() __________________________________________________ 2014 L405 Autobiography SDV8 4.4 Loire Blue Ebony interior -Click here for Thread- 2012 L322 Autobiography 5.0 Supercharged Ipanema Sand Sold 2011 L322 Vogue SE 4.4 TDV8 Baltic Blue. Sold 2002 L322 Vogue 4.4 V8 Epson Green (Fatty Offroader) Sold -Click here for Project Fatty off roader- |
||
![]() |
|
AusRR Member Since: 27 Jan 2017 Location: Sydney Posts: 7 ![]() ![]() ![]() |
Guys can I just check this mod doesnt affect your fuel economy noticeably? |
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8816 ![]() ![]() ![]() |
Made mine better.... Pete
|
||
![]() |
|
MarkNL Member Since: 26 Jan 2014 Location: utrecht Posts: 46 ![]() ![]() ![]() |
Hi,
|
||
![]() |
|
UK Marine Member Since: 22 Jul 2016 Location: Durham, County Durham UK Posts: 835 ![]() ![]() ![]() |
Hi, it does generate a fault code, just not one sufficient to put a message in the instrument panel.
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8816 ![]() ![]() ![]() |
Well he is 100% wrong, it is not a temp sender it sends power to open the stat, what can you connect it to...??????
|
||
![]() |
|
UK Marine Member Since: 22 Jul 2016 Location: Durham, County Durham UK Posts: 835 ![]() ![]() ![]() |
That's the fault I have and it doesn't effect anything, not even my roverphobia |
||
![]() |
|
MarkNL Member Since: 26 Jan 2014 Location: utrecht Posts: 46 ![]() ![]() ![]() |
Thanks gentlemen,
|
||
![]() |
|
rvbush Member Since: 08 Jan 2016 Location: Leamington Spa Posts: 555 ![]() ![]() ![]() |
I have literally just finished installing the diesel 88deg thermostat. Not started up yet though as need to pop out to get some coolant. Nobody mentioned what a bit*h that lower l/h bolt is to get at!!
|
||
![]() |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 8816 ![]() ![]() ![]() |
Long reach 3/8 drive 10mm socket fitted perfectly on mine... be a pig with just a spanner though.... |
||
![]() |
|
rvbush Member Since: 08 Jan 2016 Location: Leamington Spa Posts: 555 ![]() ![]() ![]() |
I actually used a 1/4 drive with extension, but I still wouldn't say it was easy!!! Pity anyone with relly big hands trying to do it. Drives: 2010 FFRR TdV8 Vogue - Stornoway Grey 2010 FFRR TdV8 Vogue SE - Zermatt Silver 1998 BMW E36 M3 GTII |
||
![]() |
|
holidaychicken Member Since: 06 Nov 2013 Location: Kent Posts: 1086 ![]() ![]() ![]() |
It is a piece of wee to fit on the Petrol M62 engine and I also used a1/4 drive ratchet and bar😁
|
||
![]() |
|
![]() ![]() |
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
