Hi guys,

My nearside front 2 parking sensors don't seem to be working properly

They both make audible clicks but they don't seem to pick anything up.

I guess the first thing to do would be to swap them around with confirmed working sensors to identify if it's the sensor or the loom.

Any idea how to get them out? 2003 TD6

If the fault doesn't follow the sensor then I will need to check the loom. Where does the other end terminate and how can I get to it?

Thanks

They remove quite easily from the rear of the bumper, though you might have to remove the bumper to get to them.

Ebay has them from about £6.50 each. Current:
- 2017 L405 3.0 V6 Autobiography
Sold:
- 2013 L405 4.4 TDV8 Vogue
- 2004 L322 4.4 Vogue (BRC LPG)
- 2002 L322 4.4 HSE (having fixed timing chain guides)
- 2000 P38 4.6 Vogue (BRC LPG)
- 1981 2-door In-Vogue
- 1980 Ex-Army SIII LWB
- 1976 SIII LWB
- 1968 SIIA
Stripped for parts:
- 2003 L322 4.4 Vogue

If your really careful it is possible to pop them out with a small screwdriver...although this is NOT the recommended way of doing things.. It don't half save some time

The correct method is to get behind them and push.... some can be done with the bumper in place.. but most require removal  Yesterday I couldn't spell Engineer... Today I are one!
Inventor of the 'Guide-o-Matic automatic wheel alignment tool'
Former long term L322 owner, Up/Down graded to a Classic Tractor!

Pictures of how they fit can be found here:

www.fullfatrr.com/forum/topic40357.html Current:
- 2017 L405 3.0 V6 Autobiography
Sold:
- 2013 L405 4.4 TDV8 Vogue
- 2004 L322 4.4 Vogue (BRC LPG)
- 2002 L322 4.4 HSE (having fixed timing chain guides)
- 2000 P38 4.6 Vogue (BRC LPG)
- 1981 2-door In-Vogue
- 1980 Ex-Army SIII LWB
- 1976 SIII LWB
- 1968 SIIA
Stripped for parts:
- 2003 L322 4.4 Vogue