Where can I get a decat pipe for range rover tdv8? Also thinking about straight through exhaust.

Cheers Mikey

How much was it to get them made and did they make a difference?

This is the first set they have produced, and made up jigs so they can can reproduced on demand. What I paid for them wouldn't be what a retail customer would pay

They may be a bit of distance away from you, but they were made for me by Pipe Dynamics in Leven, Fife. Wouldn't hesitate to recommend them to anyone

The L322 TDV8 has a pre-cat in each downpipe, then the cats, then silencer at the back. The pre-cats would be a to replace, but the main cats are easily removed, and replaced with straight pipe, or a dummy cat (depending on local regs )

I'd love to tell you they made a huge difference, but the engine is still sat on the floor

I was under car yesterday and can only see one pair of cats.

Tdv8 disco.......

That sounds interesting Mikey....... going to be a step up from a tdv6.. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

I actually got a new stainless exhaust fitted yesterday from powerflow and its crap. No noise difference and welding is shocking. So now I'm thinking decat and straight through exhaust. What you reckon? Just wanting bit more burble.

northernmonkeyjones wrote:

Tdv8 disco.......

That sounds interesting Mikey....... going to be a step up from a tdv6..

Having explored the upper limits of TDV6 and driveline, now I:

Want a TDV8
Need the practicality and 7 seats of a Disco 3
Financially too far into my D3 to get rid

Just hope to it all comes together and works

Aiming for another magazine feature with this one, same as my last

Click image to enlarge

Shawser1203 wrote:

I actually got a new stainless exhaust fitted yesterday from powerflow and its crap. No noise difference and welding is shocking. So now I'm thinking decat and straight through exhaust. What you reckon? Just wanting bit more burble.

Decat will give quicker turbo spool and more low end torque and a little more noise

Straight through will be VERY noisy. Had the same on my 2.7 TDV6. Sounded lovely, but very, very loud...