Hi All, I am new to the forum from Perth, Western Australia.
I am interested in fitting front protection for my Vogue TDV8, so far no one I know can do it, looking through the web and talking to a few suppliers, it appears that there is basically no demand for it therefore with the airbag compatibility issue, nothing exist for this product. Anyone had any success? I am aware of rubberised bull bars for pre 2005 models but was hoping for something more protective
Cheers Jack

As you have found, there is little or no demand and lots of legislation to overcome if that is even possible.

Looks like you are going to have to dodge those roos!  Bish.

2005 110 TD5 CSW
2011 TDV8 Vogue SE (gone)

There is this one under going development here in Oz, but no further details have NOT been forthcoming. Early 02-05 L322's can adapt the D3 bar, the Sport uses the D4.

[img]http://www.fullfatrr.com/gallery/albums/userpics/11501/normal_f5c13da9-58ff-4b03-a4f9-ce69312d0597_zps26295cef.jpg[/img]

[img]http://www.fullfatrr.com/gallery/albums/userpics/11501/L322%20Bullbar%20B.jpg[/img]

[img]http://www.fullfatrr.com/gallery/albums/userpics/11501/thKYF4YAOP.jpg[/img]

[img]http://www.fullfatrr.com/gallery/albums/userpics/11501/Steel-L322-Bar.JPG[/img]

Last edited by Laurie915 on 19th Sep 2017 11:51am. Edited 1 time in total

REMOVED POST

Saw this from a US supplier, Vanguard bars from NY, I have contacted them requesting a quote for cost and shipping.http://www.auto-beauty.com/new-auto/bull-bar-3-w-skid-tubes-ss-5/