Help my gearbox goes into trans fail gear monitor 4 fault and gear monitor 5 fault it changes 1 2 3 then won’t go into 4th or 5th what could be wrong
Ok I have just drained the oil from my gearbox it’s the 5 speed gm box the oil is brown
I was expecting to find metal particles in the sump and magnet but nothing only a light paste as I would
Call it on the magnet is there anything I can check to see why it’s not going into 4th and 5th before I remove the box.

Last edited by Bobthebuilder4470 on 8th Apr 2018 4:19pm. Edited 1 time in total

gearbox knackered... ... - .- -.




Y. O. L. O.
.

Probably the direct clutch shaft gone (a.k.a. the toilet paper roll shaft) : http://www.fullfatrr.com/forum/post149925.html#149925

Phil

Ok I have just drained the oil from my gearbox it’s the 5 speed gm box the oil is brown
I was expecting to find metal particles in the sump and magnet but nothing only a light paste as I would
Call it on the magnet is there anything I can check to see why it’s not going into 4th and 5th before I remove the box.