Looks like my thermostat housing is leaking a little, so I’m researching the job.

I’ve read a few threads (including Edfors EGR removal thread) but I’m a little confused about if the EGRs actually need to be removed to access the thermostat housing.

I’m guessing they don’t, but there’s a couple of conflicting threads.

Could someone confirm either way please?

Cheers 2007 3.6 TDV8

If you want to change the whole housing, it's easier with the EGRs out of the way. (and everything else in the vicinity as it might take a bit of prising. __
2018 L405 3.0 TDV6 Vogue SE Fuji White
2000 4.6 V8 HSE Oxford Blue
1994 3.9 V8 Vogue Ardennes Green - resto project

Land Rover History:
2010 3.6 TDV8 Autobiography Stornoway Grey
2001 Discovery 2 TD5 GS
1999 Discovery 2 V8i XS
1994 Discovery 300Tdi
1993 Discovery 200Tdi
1989 Range Rover Vogue SE 3.5EFi
1976 Series 3 2.25
1977 Range Rover 2 door 3.5 Carb