I have a jack, how much would you charge for a machined pad? 👍

I will offer the following non profit making service to anyone who has the jack but wants an aluminium drillled pad.

1) You buy the pad from eBay.
2) post it to me in a small Jiffy bag with a £5 note. to cover return postage cost.
Please include an address label with return address.
3) I will drill it out and post it back to you if you make a £5 donation to the forum.

It may take me a few days, you know how busy us pensioners can be

Anyone who wants one can PM me for my address.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Finally got pads through post from www.creationsmotorsport.com.

I had to press the horns off, as my jacks did not have the through pin type. I machined the pad with a 16mm flat bottomed hole to fit the ram head. I then drilled and threaded an M6 hole for the grub screws I had in my toolbox! (but any size up to M8 would have been ok).

Next I spot drilled the top of the Jack ram to keep the pad from slipping off. Push fit the pad back on and tighten up grub screw, I also put in some thread lock and a second locking grub screw just in case.

Tested it on fattie and up it went like a dream no problem clear off the ground and no danger like the devil scissor Jack that they supply which collapsed the last time of using it just as well it went when the wheel was still on.

Blagged an old tool box to store it in so all went to plan. Now the problem with getting more Jacks from the breakers is he will keep any that comes in for me but there is no telling when they will arrive keep my open.

If any member can bring or send me a Jack and pad with return post paid or pm bushy and he may be able to help there I will happily fit it for them for a donation to the forum just like the very busy OAP Baltic Blue

I tried on the German fleabay to see if the jacks were any cheaper but no luck, If a member (Bushy) could get a multi buy going then I am sure we maybe able to come up with a better solution for forum members. No pressure Bushy  May The FFoRRce Be With You

OOOOPS! Where did my pictures go Still wrong way round Duh!!!!

Thanks Jim, appreciated, sounds like a really good solution!

I thought your scrap man said he had loads of them?

OK, let me do some digging on some stuff, now, do I remember seeing a photo where you had two? does that mean I'm first on the list? pretty please

 Current: 2011 FFRR Vogue SE 4.4 TDV8
Previous: -
2004 FFRR Vogue 4.4 V8 with LPG
1997 P38 4.0 SE with LPG
1997 P38 4.6 Vogue with LPG

Sorry!!!! me and IT don't mix well. May The FFoRRce Be With You

Yes they all say what you want to hear on phone but as usual it never really works out that way most times (anything for a sale) matey.

Sorry already gone to my brother. I will call the breaker on wed and if he has one you are first on the list matey ok! May The FFoRRce Be With You

Stan how do troglodytes like me rotate the pictures the correct way up please  May The FFoRRce Be With You