Home > Maintenance & Mods (L322) > Any way to test my compressor? |
|
|
Scottyav Member Since: 11 Feb 2013 Location: Cannock Staffordshire Posts: 1197 |
i refurbed mine two weeks ago it lasted a week and pressure has dropped and dash faults, tested low pressure so now fitting new compressor today _____________________________________________________
|
||
9th Oct 2018 12:50pm |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
I did a refurb on mine, lasted about 12 hours .... bought a replacement. Job done
|
||
9th Oct 2018 2:25pm |
|
Scottyav Member Since: 11 Feb 2013 Location: Cannock Staffordshire Posts: 1197 |
unless the full size spare is tight and no straps and a bad back its a right bi**h _____________________________________________________
|
||
9th Oct 2018 2:32pm |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
When I refurbed mine I left the spare out .... 'just in case' (even left the cover off tbh....) Land Rover Addict
|
||
9th Oct 2018 2:34pm |
|
mrblonde Member Since: 24 Jan 2012 Location: Cambs Posts: 728 |
Cheers all, seem a refurb isnt the best thing for a compressor then.... Have ordered complete new internals for the black turtle shell so will fit that when it arrives and go from there.
|
||
10th Oct 2018 9:12am |
|
Scottyav Member Since: 11 Feb 2013 Location: Cannock Staffordshire Posts: 1197 |
fitted mine yesterday and spot on no worries bongs or slow to raise, but i took the old one apart as i thought just check i replaced the seals properly and noticed a bit of pitting and a split seal i missed.Replaced the seal and cleaned the pit back to smooth put back together and now working fine it seems but too late as ive just fitted a brand new one _____________________________________________________
|
||
11th Oct 2018 11:21am |
|
DMRR Member Since: 14 Apr 2010 Location: Northamptonshire Posts: 2027 |
Never a bad thing having a spare
|
||
11th Oct 2018 11:29am |
|
|
All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis