![]() | Home > Maintenance & Mods (L322) > How do I get RANGE ROVER straight at the same position |
|
|
|
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311
|
So I got all the Letters front and back. How do I do this now to get them straight and at the same place again. Daniel
|
||
|
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35885
|
look at some FFRR's on ebay or pistonheads and copy the letters from them ... ... - .- -.
|
||
|
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311
|
|
||
|
| Mapmuppet Member Since: 03 Sep 2008 Location: Guildford Posts: 153
|
If I recall, I used a cotton thread taped at each side of the bonnet to ensure the lettering was straight |
||
|
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35885
|
no i was serious..looking at other FFRR's will give you a good idea where to put the letters.... ... - .- -. Y. O. L. O. . |
||
|
| nbunney Member Since: 10 Aug 2008 Location: Lancashire Posts: 2080
|
Some of the kits come with a template.
|
||
|
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311
|
Got the genuine. There is a prespaced sort of paper with square holes. so I just put the letter it in the middel of the square or do I line it up to the top? Sorry for all those questions but if it is not perfect I will hate it. Daniel
|
||
|
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311
|
Found the answer myself:
|
||
|
| Tim in Scotland Member Since: 25 Mar 2007 Location: Somewhere between here and there, if not then I'm all at sea or at home in Scotland Posts: 2181
|
Amazing what you can find on You-tube! Good of PowerfulUK to post it too and I see they have posted a few other "how to" files as well 2018 Mini Countryman Cooper S E All4 PHEV in Melting Silver - it’s whisper quiet in EV and polluter modes |
||
|
| Full fat not diet Member Since: 16 Nov 2008 Location: Herts Posts: 1209
|
A really useful vid |
||
|
| liverpoolphil Member Since: 28 Jan 2010 Location: Lancashire Posts: 111
|
A really useful vid +1
|
||
|
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311
|
try first with hairdryer with warm air if it lifts off. If it goes off you can use glueremover. There is some special remover for cars. Daniel
|
||
|
| Powerful UK Member Since: 29 Mar 2011 Location: Swindon Posts: 7
|
Just a quick note to say thanks for the positive comments about the videos... they are a little "low budget" but i hope it helps people even if they don't purchase our products.
|
||
|
| letsavit2 Member Since: 16 Oct 2010 Location: essex Posts: 854
|
does them positive comments offset all your chrome stuff they slag off...... |
||
|
|
|
| All times are GMT |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis









