I changed my high level brake light today as I first thought was that it had blown. I tested the power to the light and that was fine it was only when I removed the old one I noticed corrosion around the plug connection on the lamp side at which point the wire fell out. If I was to do it again I would remove the plug and try connecting the wires.
I'm still happy that I change it as it looks much better with the new light fitted.

nice job..  ... - .- -.




Y. O. L. O.
.

I did the same job yesterday too....
Tips for anyone doing it in future here:
https://www.fullfatrr.com/forum/topic884-75.html
 Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
I use www.glenrands.co.uk Great independent specialist!
--------------------------------------------------