No PDC, no warning lights on speedo after blower replacement | |
Long story short, my main blower was not working since the purchase of the car. I've managed to replace it & now it works which is good.
Bad is that I completely lost PDC (not engaging with reverse, looooong beep on button press and my scanner now can not communicate with the control module, but it could before).
Also no indicators lights on speedometer block lit up when I engage the lights control lever. Literally, I pull it down to turn on left turn signal, it works (blinks) as it should outside the car, but no green left pointed arrow on the dash & no ticking sound, same with right, emergency (big red) button, headlights. Outside of the car everything works, but I don't know about it when driving.
Here's how it looks like: YOUTUBE
Instrument Pack says:
bf Instrument Pack Checksum Incorrect
be Lighting Module Error
when checked with the scanner.
Worth to mention I have one failed flop actuator motor which generates annoying rattling noise when you first time open the car, I was not able to reach it, so as a temporary "solution" I removed the power connector - could this be the cause of (some of) my problems?
Thanks in advance!
Last edited by Walter Skinner on 16th Oct 2019 6:34pm. Edited 1 time in total
|