|  | Home > Maintenance & Mods (L322) > How do I get RANGE ROVER straight at the same position | 
|     | 
 | 
| 
 | 
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311    | 
 So I got all the Letters front and back. How do I do this now to get them straight and at the same place again. Daniel
 | ||
|  11th Aug 2010 8:40am | 
 | 
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35884    | look at some FFRR's on ebay or pistonheads and copy the letters from them ... ... - .- -.
 | ||
|  11th Aug 2010 8:44am | 
 | 
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311    | 
 | ||
|  11th Aug 2010 8:46am | 
 | 
| Mapmuppet Member Since: 03 Sep 2008 Location: Guildford Posts: 153    | If I recall, I used a cotton thread taped at each side of the bonnet to ensure the lettering was straight   | ||
|  11th Aug 2010 9:01am | 
 | 
| stan Site Moderator Member Since: 13 Jul 2010 Location: a moderate moderated moderator moderating moderately in moderation Posts: 35884    | 
 no i was serious..looking at other FFRR's will give you a good idea where to put the letters.... ... - .- -. Y. O. L. O. . | ||
|  11th Aug 2010 9:29am | 
 | 
| nbunney Member Since: 10 Aug 2008 Location: Lancashire Posts: 2080      | Some of the kits come with a template.
 | ||
|  11th Aug 2010 10:28am | 
 | 
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311    | Got the genuine. There is a prespaced sort of paper with square holes. so I just put the letter it in the middel of the square or do I line it up to the top? Sorry for all those questions but if it is not perfect I will hate it. Daniel
 | ||
|  11th Aug 2010 1:54pm | 
 | 
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311    | Found the answer myself:
 | ||
|  11th Aug 2010 2:37pm | 
 | 
| Tim in Scotland Member Since: 25 Mar 2007 Location: Somewhere between here and there, if not then I'm all at sea or at home in Scotland Posts: 2181    | Amazing what you can find on You-tube! Good of PowerfulUK to post it too and I see they have posted a few other "how to" files as well 2018 Mini Countryman Cooper S E All4 PHEV in Melting Silver - it’s whisper quiet in EV and polluter modes | ||
|  11th Aug 2010 3:21pm | 
 | 
| Full fat not diet Member Since: 16 Nov 2008 Location: Herts Posts: 1209      | A really useful vid   | ||
|  11th Aug 2010 4:09pm | 
 | 
| liverpoolphil Member Since: 28 Jan 2010 Location: Lancashire Posts: 111      | A really useful vid +1
 | ||
|  14th Aug 2010 11:13am | 
 | 
| Mounty Member Since: 29 Jan 2009 Location: Allschwil Posts: 311    | try first with hairdryer with warm air if it lifts off.  If it goes off you can use glueremover. There is some special remover for cars. Daniel
 | ||
|  14th Aug 2010 11:44am | 
 | 
| Powerful UK Member Since: 29 Mar 2011 Location: Swindon Posts: 7      | Just a quick note to say thanks for the positive comments about the videos... they are a little "low budget" but i hope it helps people even if they don't purchase our products.
 | ||
|  29th Mar 2011 10:17pm | 
 | 
| letsavit2 Member Since: 16 Oct 2010 Location: essex Posts: 854      | 
 does them positive comments offset all your chrome stuff they slag off......  2004 black Vogue TD6 | ||
|  29th Mar 2011 10:30pm | 
 | 
|     | 
 | 
| All times are GMT | < Previous Topic | Next Topic > | 
| Posting Rules 
 | 
Site Copyright © 2006-2025 Futuranet Ltd & Martin Lewis
 
 




 
    British Humor?
 British Humor?
