fullfatrr.com - View topic - Phone Holder/Mounts

Advertise on fullfatrr.com »

Forum · Gallery · Wiki · Shop · Sponsors

Home · FAQ · New Posts · My Posts · PMs · Search · Members · Map · Calendar · Profile · Donate · Register · Log In

Home > Maintenance & Mods (L405) > Phone Holder/Mounts

Page 1 of 2

Print this entire topic ·

Japseroony

Member Since: 18 Nov 2008
Location: North East
Posts: 358

2019 Range Rover SVAutobiography 5.0 SC V8 Indus Silver

Phone Holder/Mounts

Hi Folks

Having crossed over from the D4 where the Brodit phone mounts were really good to a L405 I cannot find a decent mount from Brodit or anyone else so can you please show me some pics of where you have mounted your phones as opposed to the centre cup holders etc

I don't like covering the air vents as they either blow hot or cold air and I really don't want to subject my phone to that "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

28th Nov 2019 5:35pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34925

brodit do them for the L405, try googling ... - .- -.

click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

28th Nov 2019 5:38pm

Japseroony

Member Since: 18 Nov 2008
Location: North East
Posts: 358

Stan, as it says in my post the Brodit ones are pi** poor for the L405 so looking for alternatives "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

28th Nov 2019 5:40pm

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34925

ah sorry , i misread your post...

i know you dont want to block the air vent but i have a sat nav mount on the drivers one and it doesnt restrict air flow that much..

do you have a cd player? cos theres mounts that slide in the hole.. ... - .- -.

click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

28th Nov 2019 6:53pm

ADI

Member Since: 13 Oct 2017
Location: South Yorkshire
Posts: 70

https://www.brodit.co.uk/brodit/vehicles/L...654911.htm BMW X3 30e XDrive M Sport
GoneBMW 330e
Gone MY2016 RR Vogue Fuji White SDV8 with a few extras...
Gone MY2016 Discovery Sport HSE

28th Nov 2019 9:48pm

Japseroony

Member Since: 18 Nov 2008
Location: North East
Posts: 358

ADI, that’s just another cr** Brodit mount as I mentioned in my original post and won’t allow me to fit my phone mount and phone into it due to the angle of its face and the dash "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

28th Nov 2019 9:55pm

roberlar

Member Since: 16 Feb 2019
Location: Buckinghamshire
Posts: 203

2013 Range Rover Autobiography SDV8 Santorini Black

Why do you need a phone mount when info is displayed on the screen ?

28th Nov 2019 11:35pm

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 392

2017 Range Rover Autobiography SDV8 Carpathian Grey

In exactly the same boat. I’m going to buy this one:

29th Nov 2019 12:08am

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 392

roberlar wrote:
Why do you need a phone mount when info is displayed on the screen ?

I like to see my phone’s home screen, I like to have a dedicated place to keep it and sometimes I’ll run both Waze on my phone and the LR sat nav at the same time.

29th Nov 2019 12:12am

Japseroony

Member Since: 18 Nov 2008
Location: North East
Posts: 358

roberlar wrote:
Why do you need a phone mount when info is displayed on the screen ?

Somewhere to store it as my cup holders are full and I like to see it as not everything connects through the car

"UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

29th Nov 2019 9:15am

Japseroony

Member Since: 18 Nov 2008
Location: North East
Posts: 358

LT, do you have the 2 screens or is your FF like the pic with the single screen at the top - mine is the double screen and my concern is the gap around the side and will it damage the screen. Also, the angle of the holder face is not great looking at the pics and I am not sure if my phone mount once screwed in place will allow the phone to be placed into the holder

Let me know how you get on and a pic of it fitted would help "UNDERSTEER" ----is when you hit the fence with the front of the car.
"OVERSTEER" ------is when you hit the fence with the rear of the car.
"HORSEPOWER" ----is how fast you hit the fence.
"TORQUE" -----------is how far you take the fence with you.

29th Nov 2019 9:18am

LT

Member Since: 13 Mar 2017
Location: South West
Posts: 392

Good point. I have the MY17 which doesn’t have the lower screen.

29th Nov 2019 9:33am

stan
Site Moderator

Member Since: 13 Jul 2010
Location: a moderate moderated moderator moderating moderately in moderation
Posts: 34925

theres plenty of shiney surface on the lower panel so maybe a sucker type phone mount? ... - .- -.

click link for ,

FORUM WIKI

HOW TO Ǝꓕ∀ꓕOꓤ PICS

workshop manual downloads are in our wiki

.

29th Nov 2019 9:48am

Big Boy R44ROV

Member Since: 14 Nov 2011
Location: Ford Hill, Wirral. Not Merseyside
Posts: 554

2012 Range Rover Autobiography 5.0 SC V8 Fuji White

I bought a phone holder unit from Halfords. It cost me a tenner. It didnt fit perfectly, but by a bit of slight modification to the suction cup cutting it roughly the same size as the little square area by the drivers side, the unit was made to fit perfectly with no movement whatsoever. It is adjustable so wont interfere with any of the steering controls and will tale most phones. I've even run the power lead behind the dash so there's no trailing leads either.
It certainly doesn't look out of place.
it doesn't cause any damage to the dash or surfaces either.

Click image to enlarge

Tony
You're always in the

........it's just the depth that varies
2011 5.0 Autobiography Fuji White
2019 Audi Q2 in White
04 SL55AMG

Gone:
07 4.2 SC in silver.
06 4.2 SC in black RSE
RRS 4.2 SC in Black RSE
52 4.4 Vogue in silver
04 Mercedes CLK 320 Conv
03 4.0 V8 ES Disco in Silver
00 TD5 90 County
98 4.6 HSE in Epsom x3
97 3.9ES Disco
93 L 4.2 LSE in black
too many classics to mention !
V8 Lightweight
Too many series to mention !
IID for L322

29th Nov 2019 7:16pm

ilard

Member Since: 21 Oct 2012
Location: London
Posts: 698

If you can lose an air vent then these are brilliant. I have an iPhone XS Max and it can hold it solid.

https://www.amazon.co.uk/gp/product/B07FC6W1CK L405 P400e Autobiography (MY2020)... Silicon Silver / Espresso

29th Nov 2019 11:52pm

Page 1 of 2

All times are GMT + 1 Hour

Jump to

< Previous Topic | Next Topic >

Posting Rules

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum