I’m mid way thru fitting new O rings and the two oil cooler rubber gaskets and I’ve run into a snag.

I’ve followed mm289’s guide in the wiki BUT did what he said to avoid. I broke this spigot pictured:

Been done may times it’s a whole big pipe loom.

Many have repaired with a stent of some type epoxy fixed into position. Have a search there are several threads on it👍🏻 There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Nice one, thanks NMJ 2012 4.4 TDV8 Westminster - Baltic Blue, Jet interior
1997 P38 2.5 DSE auto & 1998 P38 2.5 DT Manual
1988 Vogue 3.5 EFI - Manual, gone.
2004 Volvo C70 2.0T convertible, had since new.
2007 Mazda MX-5 2.0 Sport Roadster/Coupé, had since new.
2024 Mini Cooper S cabrio, JCW kit, 2.0, DCT auto

https://www.fullfatrr.com/forum/topic48509.html?highlight=stent There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

It's about £80 quid new. Worth just fitting one. I've had one fitted as preventative maintenance  Gone to a good home: 2011 4.4 TDV8 Vogue SE Buckingham Blue with Ivory and clear glass = "Rory"
2025MY Defender D350 90 in Silicon Silver on coils
1974 Series 3 Lightweight = "Millie"
Many, many other Landies over the years
My preferred specialist: www.glenrands.co.uk
--------------------------------------------------