Hello,

this Morning I started to record live values with the IID Tool.
Unfortunately I forgot to logout our or to „leave correctly“ when I switched off the ignition and left the car.

Now, when I come back and try to login again the IID tool always ask first „you can‘t leave while you‘re logging“

So do you know how can I escape out if this neverending loop?

I disconnect, I logged out, logged in, switched on/off the oBD-GAP-dongle... as soon as I start the GAP-application I am welcomed by “you can‘t leave...“


Next I would try is to delete and then re-install of the software... but maybe there is another way

Click image to enlarge

Drop Pat at Gap an email. By all accounts a helpful chap.👍🏻 There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Thank you.
I contact Pat via the „support“-contact on the GAP-website,
right?

OK

found his fullfatrr-Membername and sent PM

gapteam@gap-diagnostic.com

have you tried rebooting the app.

Assuming iphone, double-tap the round button then your open apps will 'stack'.
Find the IIDTool app and swipe up to completely close the app.

Then relaunch

. Cheers, Greg
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2011 Vogue SE 4.4 with lots of toys in Stornaway

Yes this worked
Great help