Good evening! I'm in the process of installing an Android HU to my MY02 Td6.

Right now facing a "no sound" issue, because of DSP.

Managed to score some "i-bus decoder" which is supposed to trick the system & allow DSP to startup.

To hook it up, I need 3 wires: 12v, ground, i-bus.

Now, when removed CD Changer, I've discovered two harnesses for 6 & 3 pins.

The 3 pin wires are:
- Red with green line (12v I hope)
- Brown (ground, I hope)
- White with grey line & yellow dots (which I know is i-bus).

So basically I'm looking for a confirmation that Red/green is 12v and brown is ground. Tried Rave, but my version describes completely different config.

Thanks in advance!

Found it, C0941, looks like they are indeed 12v, ground and i-bus. Can someone confirm please?

If you know which of the 3 is I-bus, it should be easy to confirm the other 2 as gnd and 12v with a mutimeter. Gnd should show continuity to the chassis, and the 12V should show, well 12v.