Hi Everyone,

I'm going to do the tailgate modification to my '09 to have the tailgate open gently instead of crashing down like it does now.

I got all of the needed parts from this thread: https://www.fullfatrr.com/forum/topic9221.html?highlight=lr021053

The only question is exactly how to position the bracket that attaches to the tailgate.

I found this image on the web but I don't know if it's accurate.

Click image to enlarge

https://www.fullfatrr.com/forum/topic9221....d+tailgate

Have a look on here there’s some fitting info in there somewhere. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Thanks for the pointer but that's the thread where I got all of the information about what parts are needed.

This does have a bit of placement info but it didn't have any exact measurements as I recall.

I was hoping to find someone with a '10, '11 or '12 who could verify by actually measuring it themselves.

Thanks!
Larry. 2009 Range Rover L322 Autobiography
Bournville/Ivory
Save lives, give blood.

Ah, ok.

Sorry mine has gone now, I did do this addition to my 07, seemed to recall I just put it where it sat right. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

ive done this mod on my 04... the tailgates are the same (ish) so i will measure mine in the morning if you still need the info

It's dark out hereabouts, but leaving a nice ale and measuring things, if it helps mine is 124mm on the indicated dimension.

Thus I guess that the 120-125mm is fine.


and the clouds are not letting us see the Germinids tonight. B*gg*r  Cheers
Richard

(there are no such things as an ordinary FullFat, an ordinary cat or too many tools)
2011 TDV8 Vogue Santorini Black
Gap IIDBT