hi there
is there anyone in the worthing area that knows a thing or two about eas and how to programme it?
long storey short
l322 front bag blew
changed it ,now a matching pair no leaks or faults
tried to calibrate with foxwell nt530 which can do it
but when it goes into calibration mode the osf and osr is always pumped up higher approx 20mm than the nearside
and then when calibrated and exited form ecu i either get a higher setting on the o/f or the both rears stay high and dont come down.
but if i put the car into off road height dash switch,it is a near perfect at 810mm all round give or take 2/3mm
thanks in advance.