Hi All,

So today I jumped in the car to discover that it was stuck in access mode and doing all sorts of wonderful things which did not make for a fun start to the day.

After the school run I opened the bonnet to investigate and discovered a delightful rodent has chewed not 1 but 2 holes in the air pipe that connects the drivers side strut to the distribution block.

Fingers crossed but this is all the damage I could see.

Any idea what the part number is and is it going to be a dealer only part?

Cheers

you could look in the microcat links in the wiki for the part number or email robin at our forum sponsor , duckworths..

robinhall@duckworth.co.uk ... - .- -.




Y. O. L. O.
.

If it is the plastic pvc stuff thats been chewed you could save yourself a fortune and go to a hose specialist such as pirtek or a local place and buy a couple of push fit joiners and a small length of pipe, if it has enough excess you might get away with just one joiner.

eg
https://uk.rs-online.com/web/p/pneumatic-s...s/9160873/ Current
2017 Range Rover Sport SVR
2001 Porsche 911 Turbo
_____________________________________
Previous
2013 Range Rover Autobiography SDV8
2007 Range Rover Vogue SE TDV8
2002 Range Rover HSE TD6
+ Many other non LR products

Thanks both, ordered from dealer for delivery tomorrow £99!

Now planning how to pest proof my parking area, seems 3 bait boxes aren’t sufficient.

Coming back to this in case anyone needs the information in the future,

Part number for the Front Air Suspension Pipes is LR122994 comes as a set so both sides are in the bag.

Description is Tube - Air Suspension and Team Valley Land Rover did them for £99.92 totally overpriced for what they are.

It took 5 mins and a 12mm spanner to fit, piece of cake.

In future any 6mm pvc pipe would have done as the fittings are reusable if you are careful with the brass collets.