Can anybody recommend a good place to buy wheel nuts.

There seems to be a plethora of suppliers with prices ranging wildly. I don’t mind paying a premium if I get a premium product. I would imagine there are many ‘duff’ sets out there.

Lr-trade parts are doing a set of 20 for £49 that look ok. There are many sets that are cheaper that don’t look ok

Any recommendations gratefully received

Wrington Engineering - very expensive but probably the best. Geoff

Craig is selling some JLR solid nuts at a very good price, but I think he has only got black.
Mike G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

I just got some off LR direct. OEM.

They are only a couple of quids each, so I tend to just buy a few to have on hand then check and swap out the swollen ones periodically rather than dumping a whole load of cash into a set of stainless ones. There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

N MJ,
I like your method, but don’t let them get too bad.
I had one where the stainless steel cover was swollen but when I tried to remove it the cover started to spin and leave the iron inner stuck holding the wheel. Luckily a bit of careful persuasion with a hammer and chisel got it removed without damaging the wheel.
At that point I went solid nuts all round and binned the locking nuts.
Mike. G reg 2.5VM Vogue Portofino red 1991- 1999
V reg 2.5td P38 Rioja red 1999- 2006
53 reg td6 Vogue Oslo blue 2006- 2015
11 reg 4.4 TdV8 Vogue SE. Baltic blue 2015- date.
https://www.fullfatrr.com/forum/topic56162...tty+affair

Quick walk round every couple of months with a socket is all it takes.  There is nothing that can't be fixed with a hammer😜😜
FFRR 4.4 SDV8 Autobiography Santorini Black.
KIA E-Niro 4+
2021 Discovery 5 D300 MHEV commercial

Thanks for the recommendations.

supershuttle I see what you mean about price, I would be afraid someone would pinch the wheel nuts and leave the wheels behind Although even from the pictures they do look well made.

I have these on mine...

https://www.ebay.co.uk/itm/153828858597

£24 for 20 when I purchased.

I applied a small bead of clear silicone around the base of the nut cap to prevent any dirt and crud getting in there and causing premature corrosion/swelling. Time will tell. Kev

2014 L405 RR Vogue SE 4.4 SDV8 in Corris Grey
2010 L320 RRS HSE 3.0 TDV6 in Stornoway Grey

I opted for these. Simply because they were one piece, so hopefully no cap to go pear shaped


https://www.ebay.co.uk/itm/20x-Alloy-Wheel...2749.l2648