Home > Technical (L322) > Adaptive Cruise Help Please |
|
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 7905 |
I read on here a while ago about changing settings in the CCF to make the adaptive cruise work in stop start traffic and brake down to 0mph instead of the current 18mph...
|
||
1st Mar 2021 11:25am |
|
bishbosh10 Member Since: 25 Apr 2013 Location: North Somerset Posts: 344 |
I have a similarly vague recollection but it was for the 405?......... I think.... Bish.
|
||
1st Mar 2021 1:40pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7625 |
No, I remember that too, it was on an L322 but the software was never enabled or fully tested by the factory.
|
||
1st Mar 2021 1:44pm |
|
mjdronfield Member Since: 04 Nov 2011 Location: Derbyshire Posts: 7625 |
Here we go.
|
||
1st Mar 2021 1:47pm |
|
millerj90 Member Since: 25 Oct 2010 Location: Melksham Posts: 332 |
I retro fitted the ACC following GraemeS instructions. And although the ACC worked perfectly, whenever I used Queue Assist; the system threw an error. I assumed as it was never written or implemented for the 2012 Westminster I had at the time, I disabled it and stuck with the ACC.
|
||
1st Mar 2021 2:17pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 7905 |
Thanks guys, I shall have a read later... Pete
|
||
1st Mar 2021 3:34pm |
|
kooky_guy Member Since: 25 Nov 2011 Location: Sandhurst, Berkshire Posts: 385 |
Please post any findings! 2010 4.4 TDV8 Vogue SE |
||
1st Mar 2021 4:39pm |
|
GraemeS Member Since: 07 Mar 2015 Location: Wagga area Posts: 2301 |
I've not had any errors with mine but I've not tried to resume after coming to a stop. Apart from an initial test to see if the vehicle would stop, which it did, I rarely allow speed to get very low. |
||
1st Mar 2021 9:06pm |
|
Haylands Member Since: 04 Mar 2014 Location: East Yorkshire Posts: 7905 |
Thanks Graeme, did anyone arrive at a conclusion on if the 5.0 was different to the 4.4...?
|
||
1st Mar 2021 10:40pm |
|
|
All times are GMT + 1 Hour |
< Previous Topic | Next Topic > |
Posting Rules
|
Site Copyright © 2006-2024 Futuranet Ltd & Martin Lewis